Új hozzászólás Aktív témák

• #9584 Intruder2k5 MODERÁTOR donmackó #9582

  Új Válasz 2014-10-22 23:44:50 #9584

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Intruder2k5

  MODERÁTOR

  válasz donmackó #9582 üzenetére

  Ezt én nem tudom megmondani Neked, majd jön suste, és felhomályosít a pontos teendőkről! Lehet SMART-ot olvasni USB-n keresztül is, ha ezt támogatja a HDD keret! Nekem is működik...

  root@INT-ROUTER:/tmp/home/root# smartctl --all /dev/sda
  smartctl 6.3 2014-07-26 r3976 [mips-linux-2.6.22.19] (localbuild)
  Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  
  === START OF INFORMATION SECTION ===
  Model Family: Western Digital Scorpio Blue Serial ATA (AF)
  Device Model: WDC WD5000BPVT-00HXZT1
  Serial Number: WD-WXG1A6136123
  LU WWN Device Id: 5 0014ee 601628a2f
  Firmware Version: 01.01A01
  User Capacity: 500,107,862,016 bytes [500 GB]
  Sector Sizes: 512 bytes logical, 4096 bytes physical
  Rotation Rate: 5400 rpm
  Device is: In smartctl database [for details use: -P show]
  ATA Version is: ATA8-ACS (minor revision not indicated)
  SATA Version is: SATA 2.6, 3.0 Gb/s
  Local Time is: Wed Oct 22 23:43:06 2014 CEST
  SMART support is: Available - device has SMART capability.
  SMART support is: Enabled
  
  === START OF READ SMART DATA SECTION ===
  SMART overall-health self-assessment test result: PASSED
  
  General SMART Values:
  Offline data collection status: (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
  Self-test execution status: ( 0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
  Total time to complete Offline
  data collection: (11760) seconds.
  Offline data collection
  capabilities: (0x7b) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  Offline surface scan supported.
  Self-test supported.
  Conveyance Self-test supported.
  Selective Self-test supported.
  SMART capabilities: (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
  Error logging capability: (0x01) Error logging supported.
  General Purpose Logging supported.
  Short self-test routine
  recommended polling time: ( 2) minutes.
  Extended self-test routine
  recommended polling time: ( 117) minutes.
  Conveyance self-test routine
  recommended polling time: ( 5) minutes.
  SCT capabilities: (0x7035) SCT Status supported.
  SCT Feature Control supported.
  SCT Data Table supported.
  
  SMART Attributes Data Structure revision number: 16
  Vendor Specific SMART Attributes with Thresholds:
  ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  3 Spin_Up_Time 0x0027 207 204 021 Pre-fail Always - 650
  4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 49
  5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 8436
  10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 49
  192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 47
  193 Load_Cycle_Count 0x0032 193 193 000 Old_age Always - 22377
  194 Temperature_Celsius 0x0022 109 101 000 Old_age Always - 38
  196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  
  SMART Error Log Version: 1
  No Errors Logged
  
  SMART Self-test log structure revision number 1
  No self-tests have been logged. [To run self-tests, use: smartctl -t]
  
  SMART Selective self-test log data structure revision number 1
  SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1 0 0 Not_testing
  2 0 0 Not_testing
  3 0 0 Not_testing
  4 0 0 Not_testing
  5 0 0 Not_testing
  Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
  If Selective self-test is pending on power-up, resume after 0 minute delay.

Új hozzászólás Aktív témák