Új hozzászólás Aktív témák

  • Akita

    tag

    Hello!
    Tegnap vettem egy Seagate 160Gb-os wincsit. Windows Milleneum rendszerlemezzel bootoltam és az fdisk-el partícionáltam, mert ha az xp telepítő cd-jével partícionálok csak ntfs -t ajánl fel, az fdisk meg fat 32-t. Lényeg a lényeg. Partícionálás után, formázáskor több hibás szektorcsoportot is jelzett. Valahogy az xp se volt megelégedve a formázással mert ismeretlen formátumra hivatkozva szintén megformázta, természetesen ntfs formátumban. Ezzel valahogy megbarátkoznék, de segítségeteket kérem milyen programmal tudom átvizsgálni a wincsit hogy tényleg vannak-e bad szektorok rajta, lévén garanciában biztos kicserélik ha bizonyítani tudom. Letöltöttem valami Seagate gyári tesztprogramot ami 2 kis floppyról bootplva valóban tesztelt nekem vagy másfél óráig és ki is írt mindenféléket. Sajnos angolul nem értek, de azért erősen kerestem a szót hogy bad sector? Nem találtam, vagy csak én vagyok béna :)
    Szóval magamfajta lámának való program kellene ami felderíti vannak e hibás szektorok.
    De ha lehetek telhetetlen, létezik az fdisk-en kívül olyan program ami dos-ban képes formázni és felkínálja a fat32-őt is? Azt olvastam valahol hogy az ntfs jobban gazdálkodik a hellyel, viszont lassabb vele a wincsi működése.
    Kösz előre is

  • naga

    senior tag

    Seagate tesztprogival teszteld le és másold ide be a log file-t.

  • Akita

    tag

    Wincsim két felé van osztva, itt vannak a log file adatai

    SeaTools Desktop v3.00.07
    Copyright (c) 2004 Kroll Ontrack Inc.

    2/13/2005 @ 11:21 AM

    The following information has been generated by SeaTools Desktop. Use
    this information to help you recognize and resolve potential data access
    problems.


    System Information:
    BIOS Date 04/22/04
    Conventional Memory size 638 K
    Extended Memory size 58532 K
    IO Channel type PCI



    Drive Information:
    SIZE MODEL
    --------- ---------------------
    160 GB ST3160023A


    Serial Number = 5JS3VX3S
    Int13 Num = 80, PHYS CHS = 16383x16x63.
    ParmTable CHS, Rsvd = 19457x255x63

    PARTITION CYLINDER SIZE
    ---------- ------------ ----
    # Type Start End MB
    PRIMARY
    1 NTFS 0 15565 128042
    EXTENDED
    2 FAT32 15566 19456 32006


    Diagnostic Results:

    Seagate DiagATA Quick Test Result: Passed
    Recommendation:
    The ''Quick Test'' is adequate for most situations.
    Consider running the ''Full Test'' which
    verifies each sector on the drive if you need to run a more
    comprehensive diagnostic.



    Results from Seagate's DiagATA/SCSI:
    -----------------------------------------------------------------

    DIAGATA.EXE Version 3.07.40526ML
    Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

    -----------------------------------------------------------------
    Timer Resolution: 0.000122
    Short Test Begin: 13-Feb-2005 10:17:37
    Cable Test - 0 Errors
    Buffer Test - 0 Errors
    Identify Data
    Model Number: ST3160023A
    Serial Number: 5JS3VX3S
    Firmware Revision: 8.01
    Default CHS: 16383-16-63
    Current CHS: 16383-16-63
    Current Capacity: 16514064 Sectors
    Total Capacity: 312581808 Sectors
    Conductor Cable Reported
    ID Method: Jumper
    SMART Check: Passed
    DST - Passed
    PIO/DMA Data Compare
    Total Bytes = 7589376
    Estimated PIO Transfer Rates
    Min: 2.90MB/s Max: 2.98MB/s Avg: 2.93MB/s
    Estimated DMA Transfer Rates
    Min: 84.94MB/s Max: 113.26MB/s Avg: 87.58MB/s
    SMART Check: Passed
    Short Test Passed: 13-Feb-2005 10:18:34


    -----------------------------------------------------------------
    End results from Seagate's DiagATA/SCSI

    ATA Full Test Result: Passed



    Results from Seagate's DiagATA/SCSI:
    -----------------------------------------------------------------

    DIAGATA.EXE Version 3.07.40526ML
    Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

    -----------------------------------------------------------------
    Timer Resolution: 0.000122
    Long Test Begin: 13-Feb-2005 10:18:36
    Cable Test - 0 Errors
    Buffer Test - 0 Errors
    Identify Data
    Model Number: ST3160023A
    Serial Number: 5JS3VX3S
    Firmware Revision: 8.01
    Default CHS: 16383-16-63
    Current CHS: 16383-16-63
    Current Capacity: 16514064 Sectors
    Total Capacity: 312581808 Sectors
    Conductor Cable Reported
    ID Method: Jumper
    SMART Check: Passed
    Full Scan (0 to 312581808) - Passed
    Elapsed Time: 1.01 Hours
    Estimated Internal Transfer Rates
    Min: 15.16Mb/s Max: 657.53Mb/s Avg: 368.92Mb/s
    PIO/DMA Data Compare
    Total Bytes = 26247168
    Estimated PIO Transfer Rates
    Min: 2.91MB/s Max: 2.98MB/s Avg: 2.96MB/s
    Estimated DMA Transfer Rates
    Min: 74.58MB/s Max: 93.23MB/s Avg: 92.07MB/s
    Long Test Passed: 13-Feb-2005 11:19:25


    -----------------------------------------------------------------
    End results from Seagate's DiagATA/SCSI



    File Structure Test Result:

    Partition 1 (NTFS (128 GB) ) Result: Failed with critical Errors


    NOTE: Any report of possible errors in the file system tests are for
    informational purposes only. We suggest you should consider testing with
    the official file system diagnostic utilities for your operating system.
    Seagate is not able to assist with troubleshooting or reviewing
    file system test results.

    Partition 2 (FAT 32 (32 GB) NO NAME ) Result: Critical Error(s)
    38 Critical Structure Error(s)
    501 Non-Critical Structure Error(s)
    118656 KBytes in 1493 files
    6 directories were found
    4 KBytes in 2 deleted files
    1 deleted directories were found

    ERROR SUMMARY:
    DIR Structures 38
    Orphaned Data Blocks 501


    NOTE: Any report of possible errors in the file system tests are for
    informational purposes only. We suggest you should consider testing with
    the official file system diagnostic utilities for your operating system.
    Seagate is not able to assist with troubleshooting or reviewing
    file system test results.



    ******************************************


    Recommendation:
    All selected physical diagnostics passed.

    If you are not experiencing data loss and SeaTools reports File
    System Structure errors, they may be caused by a lock-up or
    failure to shutdown Windows correctly. Many times, these errors
    may be repaired through normal system maintenance which
    includes using the Windows provided ''Defrag'' and
    ''Scandisk / Chkdsk / Error Checking'' utilities.

    If you are experiencing a hardware error, you should isolate
    the cause and replace the failing component. If you are unsure how
    to proceed with repairs, contact a computer professional. After
    completing any maintenance tasks, run SeaTools again to
    verify that all errors have been repaired. If errors continue to
    occur, the system may not be stable. Again, contact a computer
    professional.




    ========================================================

  • Jano

    senior tag

    A log szerint kritikus hibák vannak a file rendszerben, szvsz ha nem telepítettél rá windows-t csak a partíciók vannak meg akkor ez hardver hiba lesz.

    A tudás érték!!!

  • naga

    senior tag

    fizikailag hibátlan a lemez. :)
    File struktúra hibák lehetnek, rajta, de az is lehet, csak vaklárma az egész, ha működik rendesen.

  • Akita

    tag

    A legújabb felállás az hogy elfelejti milyen partíció van. Ismeretlennek mondja és persze lehet újra formázni az egészet. Szóval biztos hogy valami gáz van vele. Most nem osztottam meg hanem az egészet ntfs formátumban formáztam. telepedik rá az xp. Ha kész újra lefuttatom rajta a Seagate gyári tesztprogramját, de akárhogy is lesz, úgy érzem vissza fogom vinni, hátha kicserélik

Új hozzászólás Aktív témák