Új hozzászólás Aktív témák

• #49174 i.attila tag i.attila #49172

  Új Válasz 2013-07-14 09:02:31 #49174

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  i.attila

  tag

  válasz i.attila #49172 üzenetére

  Hátha valaki bátrabb lesz, és kipróbálja ezt:

  How to activate PVR on Samsung EH5300

  Notes: Before doing this, take note of your calibration settings because you'll lose your custom settings.

  1.- Download ruSamsungTVCommunicator

  2.- Connect your TV and your PC to your local network.

  3.- Open ruSamsungTVCommunicator and wait until it finds your TV (If it doesn't find it, you'll need to manually enter its ip address)

  4.- A prompt will be shown in your tv, accept it.

  5.- Turn off your TV and ruSamsungTVCommunicator then press {INFO} {MENU} {MUTE} {POWER} on the remote and re-open ruSamsungTVCommunicator.

  6.- Press FACTORY and after this 3SPEED buttons on ruSamsungTVCommunicator.

  7.- From Service Menu select Control, than Sub-option; Find PVR and change it to ON and PVR Num =1

  8.- Save settings by pressing POWER on remote controller (TV turns off)

  9.- Enjoy your new PVR!!!

  Notes: You'll need a fast usb stick or at least a 5300rpm hdd to be able to use the record and timeshift functions. You need first to format your drive to be able to use those functions, to do that go to AllShare, TV Records, select your drive, it will ask you to format it, do it. If it doesn't work it's because your drive isn't fast enough or the usb cable you're using is not good, so first try to use other cables.

Új hozzászólás Aktív témák