-
Fototrend
TP-Link WR1043ND - N450 router
Új hozzászólás Aktív témák
-
JKalo
tag
válasz
Intruder2k5 #50484 üzenetére
???
root@OpenWrt:~# ifconfig
br-lan Link encap:Ethernet HWaddrXXXXXXXXXXXXXX
inet addr:192.168.1.152 Bcast:XXXXXXXXXXXXXXMask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:237171030 errors:0 dropped:363982 overruns:0 frame:0
TX packets:131898817 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:336383572725 (313.2 GiB) TX bytes:32303276839 (30.0 GiB)eth0 Link encap:Ethernet HWaddr
XXXXXXXXXXXXXX
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:237781752 errors:0 dropped:0 overruns:0 frame:0
TX packets:131461089 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3809025993 (3.5 GiB) TX bytes:2960675418 (2.7 GiB)
Interrupt:4eth0.1 Link encap:Ethernet HWaddr
XXXXXXXXXXXXXX
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:237781732 errors:0 dropped:0 overruns:0 frame:0
TX packets:130605108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:338831364777 (315.5 GiB) TX bytes:28177243446 (26.2 GiB)eth0.2 Link encap:Ethernet HWaddr
XXXXXXXXXXXXXX
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)lo Link encap:Local Loopback
inet addr:XXXXXXXXXXXXXXMask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:20598 errors:0 dropped:0 overruns:0 frame:0
TX packets:20598 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1464296 (1.3 MiB) TX bytes:1464296 (1.3 MiB)wlan0 Link encap:Ethernet HWaddr
XXXXXXXXXXXXXX
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:690 errors:0 dropped:0 overruns:0 frame:0
TX packets:1113 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:68079 (66.4 KiB) TX bytes:1051820 (1.0 MiB)root@OpenWrt:~#
-
JKalo
tag
válasz
Intruder2k5 #50484 üzenetére
Megvan a jó megoldás!
root@OpenWrt:~# wifi down radio0
root@OpenWrt:~# wifi down radio1
root@OpenWrt:~# wifi up radio1
Configuration file: /var/run/hostapd-phy1.conf
Using interface wlan1 with hwaddrxx:yy:zz:vv:mm:ddand ssid "Wifi_5GHz"
root@OpenWrt:~# wifi up radio0
Configuration file: /var/run/hostapd-phy0.conf
Using interface wlan0 with hwaddrxx:yy:zz:vv:mm:ddand ssid "Wifi_2,4GHz"
root@OpenWrt:~#