Keresés

Új hozzászólás Aktív témák

  • TMaX

    csendes tag

    Lenne egy problémám, most vettem egy 32gb-s új ssd-t és ubuntu server-t raktam rá de a boot közben csomó ata error van a log-ban.
    Már mindent kipróbáltam de nem jövök rá mi lehet a gond.
    Az ssd crystalinfo szerint kiváló kondícióban van, ICH10R vezérlő, ahci engedélyezve biosban, nativ sata nincs, ez az egy háttértár van a gépben, cseréltem sata kábelt, más sata portról is próbáltam de semmi. Aztán vinyóra is feltelepítettem azon tökéletesen megy hiba nélkül csak az a ssd-vel nem szóval vagy linux gond vagy ssd gond lehet.
    Ilyenekkel van tele a log(több száz):
    eleje ahol kezdődnek az errorok:

    [ 2.700292] ata7.00: HPA unlocked: 62531183 -> 62533296, native 62533296
    [ 2.700328] ata7.00: ATA-8: Corsair CSSD-V32GB2, 2.2, max UDMA/133
    [ 2.700332] ata7.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.701180] ata7.00: configured for UDMA/133
    [ 2.720118] scsi 6:0:0:0: Direct-Access ATA Corsair CSSD-V32 2.2 PQ: 0 ANSI: 5
    [ 2.720209] sd 6:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.720235] sd 6:0:0:0: Attached scsi generic sg0 type 0
    [ 2.720252] sd 6:0:0:0: [sda] Write Protect is off
    [ 2.720254] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.720273] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.720413] sda: sda1
    [ 2.720734] sd 6:0:0:0: [sda] Attached SCSI disk
    [ 3.080019] ata8: SATA link down (SStatus 0 SControl 300)
    [ 3.104633] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [ 3.104637] ata7.00: irq_stat 0x40000001
    [ 3.104641] ata7.00: failed command: READ FPDMA QUEUED
    [ 3.104648] ata7.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in
    [ 3.104650] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) <F>
    [ 3.104654] ata7.00: status: { DRDY ERR }
    [ 3.104656] ata7.00: error: { IDNF ABRT }
    [ 3.107211] ata7.00: configured for UDMA/133
    [ 3.107220] ata7: EH complete
    [ 3.107374] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [ 3.107377] ata7.00: irq_stat 0x40000001
    [ 3.107381] ata7.00: failed command: READ FPDMA QUEUED
    [ 3.107388] ata7.00: cmd 60/08:00:00:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in
    [ 3.107390] res 41/14:00:00:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) <F>

    aztán van ilyen is benne:

    [ 3.221971] ata7.00: status: { DRDY ERR }
    [ 3.221973] ata7.00: error: { IDNF ABRT }
    [ 3.222956] ata7.00: configured for UDMA/133
    [ 3.222963] ata7: EH complete
    [ 3.223113] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [ 3.223116] ata7.00: irq_stat 0x40000001
    [ 3.223119] ata7.00: failed command: READ FPDMA QUEUED
    [ 3.223126] ata7.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in
    [ 3.223128] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) <F>
    [ 3.223131] ata7.00: status: { DRDY ERR }
    [ 3.223134] ata7.00: error: { IDNF ABRT }
    [ 3.224115] ata7.00: configured for UDMA/133
    [ 3.224121] ata7: EH complete
    [ 3.224273] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [ 3.224276] ata7.00: irq_stat 0x40000001
    [ 3.224279] ata7.00: failed command: READ FPDMA QUEUED
    [ 3.224286] ata7.00: cmd 60/08:00:a8:2e:ba/00:00:03:00:00/40 tag 0 ncq 4096 in
    [ 3.224287] res 41/14:00:a8:2e:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) <F>

    [ 3.302167] ata7.00: status: { DRDY ERR }
    [ 3.302170] ata7.00: error: { IDNF ABRT }
    [ 3.303153] ata7.00: configured for UDMA/133
    [ 3.303159] sd 6:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [ 3.303163] sd 6:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
    [ 3.303169] Descriptor sense data with sense descriptors (in hex):
    [ 3.303171] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 3.303182] 03 ba 2b 80
    [ 3.303187] sd 6:0:0:0: [sda] Add. Sense: No additional sense information
    [ 3.303192] sd 6:0:0:0: [sda] CDB: Read(10): 28 00 03 ba 2b 80 00 00 08 00
    [ 3.303202] end_request: I/O error, dev sda, sector 62532480
    [ 3.303212] ata7: EH complete
    [ 3.303358] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [ 3.303361] ata7.00: irq_stat 0x40000001
    [ 3.303364] ata7.00: failed command: READ FPDMA QUEUED
    [ 3.303371] ata7.00: cmd 60/08:00:80:2b:ba/00:00:03:00:00/40 tag 0 ncq 4096 in
    [ 3.303373] res 41/14:00:80:2b:ba/00:00:03:00:00/40 Emask 0x481 (invalid argument) <F>

    [ 9.550816] ata7.00: status: { DRDY ERR }
    [ 9.550860] ata7.00: error: { ABRT }
    [ 9.550905] ata7: hard resetting link
    [ 10.080020] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 10.081887] ata7.00: configured for UDMA/133
    [ 10.081896] ata7: EH complete
    [ 15.080031] ata7.00: qc timeout (cmd 0x2f)
    [ 15.080038] ata7: failed to read log page 10h (errno=-5)
    [ 15.080090] ata7.00: exception Emask 0x1 SAct 0x7 SErr 0x0 action 0x6 frozen
    [ 15.080143] ata7.00: irq_stat 0x40000001
    [ 15.080187] ata7.00: failed command: READ FPDMA QUEUED
    [ 15.080235] ata7.00: cmd 60/88:00:e0:33:c4/00:00:02:00:00/40 tag 0 ncq 69632 in
    [ 15.080236] res 51/04:08:80:2b:ba/00:00:03:00:00/40 Emask 0x1 (device error)
    [ 15.080344] ata7.00: status: { DRDY ERR }
    [ 15.080388] ata7.00: error: { ABRT }
    [ 15.080432] ata7.00: failed command: READ FPDMA QUEUED
    [ 15.080479] ata7.00: cmd 60/08:08:80:2b:ba/00:00:03:00:00/40 tag 1 ncq 4096 in
    [ 15.080480] res 51/04:08:80:2b:ba/00:00:03:00:00/40 Emask 0x1 (device error)

    Ha ebből sem állapítható meg mi lehet a gond akkor majd belinkelem a teljes log letöltési helyét.

Új hozzászólás Aktív témák