Aktív témák

  • Vieron

    tag

    Sziasztok!

    Az lenne a problémám, hogy adott egy Digi 40/20 kábelnet, ami ugye PPPoE -n keresztül megy. Ha közvetlenül valamelyik itthoni gépre dugom a kábelt, és onnan tárcsázok be akkor simán megy 6 Mbyte körül a letöltés, viszont ha a Cisco 871 routeren keresztül, akkor jó esetben 3 MByte körüli a letöltés. QOS nincs bekapcsolva, itt a konfig:

    Current configuration : 8415 bytes
    !
    version 12.4
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    !
    hostname hyal
    !
    boot-start-marker
    boot-end-marker
    !
    security authentication failure rate 3 log
    security passwords min-length 6
    logging message-counter syslog
    no logging buffered
    enable secret 5 <passowrd>
    !
    aaa new-model
    !
    !
    aaa authentication login local_authen local
    aaa authorization exec local_author local
    !
    !
    aaa session-id common
    clock timezone CET 1
    !
    crypto pki trustpoint TP-self-signed-150542628
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-150542628
    revocation-check none
    rsakeypair TP-self-signed-150542628
    !
    !
    crypto pki certificate chain TP-self-signed-150542628
    certificate self-signed 01
    --REMOVED--
    quit
    dot11 syslog
    no ip source-route
    !
    !
    ip dhcp excluded-address 192.168.2.26 192.168.2.30
    !
    ip dhcp pool sdm-pool1
    network 192.168.2.0 255.255.255.224
    default-router 192.168.2.30
    dns-server 74.82.42.42 193.110.56.8 193.110.57.4
    lease 0 8
    !
    !
    ip cef
    no ip bootp server
    ip domain name lookup
    ip name-server 193.110.56.8
    ip name-server 193.110.57.4
    !
    ipv6 unicast-routing
    ipv6 cef
    !
    multilink bundle-name authenticated
    !
    !
    !
    !
    spanning-tree vlan 1 priority 8192
    username <user> privilege 15 secret 5 <hash>
    !
    !
    !
    archive
    log config
    hidekeys
    !
    !
    ip ssh rsa keypair-name hyal.lookup
    ip ssh version 2
    !
    !
    !
    !
    !
    !
    !
    interface Tunnel0
    description Hurricane Electric IPv6 Tunnel Broker
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ipv6 address <address>
    ipv6 enable
    ipv6 traffic-filter ipv6-acl in
    tunnel source Dialer1
    tunnel destination <he-frankfurt>
    tunnel mode ipv6ip
    !
    interface Null0
    no ip unreachables
    !
    interface FastEthernet0
    description Lan
    !
    interface FastEthernet1
    description WiFi
    !
    interface FastEthernet2
    description OPlay
    !
    interface FastEthernet3
    description Switchport 4
    !
    interface FastEthernet4
    description WAN Port
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    duplex auto
    speed auto
    pppoe enable group global
    pppoe-client dial-pool-number 1
    !
    interface Vlan1
    description $FW_INSIDE$
    ip address 192.168.2.30 255.255.255.224
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    ip tcp adjust-mss 1412
    ipv6 address <address>
    ipv6 enable
    !
    interface Dialer0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    shutdown
    !
    interface Dialer1
    description $FW_OUTSIDE$
    bandwidth 20000
    bandwidth receive 40000
    ip address negotiated
    ip access-group 101 in
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip mtu 1452
    ip flow ingress
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication pap callin
    ppp pap sent-username <username & password>
    !
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip http server
    ip http authentication local
    no ip http secure-server
    !
    !
    ip nat inside source list 1 interface Dialer1 overload
    ip nat inside source static tcp 192.168.2.28 9091 interface Dialer1 59091
    ip nat inside source static tcp 192.168.2.26 3724 interface Dialer1 3724
    ip nat inside source static udp 192.168.2.28 51413 interface Dialer1 51413
    ip nat inside source static tcp 192.168.2.28 51413 interface Dialer1 51413
    ip nat inside source static tcp 192.168.2.28 443 interface Dialer1 443
    ip nat inside source static tcp 192.168.2.28 21 interface Dialer1 21
    ip nat inside source static tcp 192.168.2.28 20 interface Dialer1 20
    !
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark SDM_ACL Category=2
    access-list 1 permit 192.168.2.0 0.0.0.31
    access-list 101 permit tcp any any eq ftp-data
    access-list 101 permit tcp any any eq ftp
    access-list 101 permit tcp any any eq 22
    access-list 101 permit tcp any any eq 443
    access-list 101 permit tcp any any gt 1023
    access-list 101 permit udp any any gt 1023
    access-list 101 permit tcp any any established
    access-list 101 permit icmp any any echo-reply
    access-list 101 permit icmp any any ttl-exceeded
    access-list 101 permit icmp any any port-unreachable
    access-list 101 permit ip host <he-frankfurt> any
    dialer-list 1 protocol ip permit
    no cdp run

    ipv6 route ::/0 Tunnel0
    !
    !
    !
    !
    !
    ipv6 access-list ipv6_acl
    permit tcp any any eq ftp-data
    permit tcp any any eq ftp
    permit tcp any any eq 22
    permit tcp any any eq 443
    permit tcp any any gt 1023
    permit udp any any gt 1023
    sequence 100 permit icmp any any
    !
    control-plane
    !
    !
    line con 0
    login authentication local_authen
    no modem enable
    transport output telnet ssh
    line aux 0
    login authentication local_authen
    transport output telnet
    line vty 0 4
    authorization exec local_author
    login authentication local_authen
    transport input ssh
    transport output telnet ssh
    !
    scheduler max-task-time 5000
    scheduler allocate 4000 1000
    ntp source Dialer1
    end

Aktív témák