Új hozzászólás Aktív témák

• #1428 lajbi30 csendes tag Robert7x #50

  Új Válasz 2015-08-19 07:07:15 #1428

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  lajbi30

  csendes tag

  válasz Robert7x #50 üzenetére

  Hali! egy kis segítség kellene!
  Időre szeretném kapcsólni a reléket egy RTC-vel,de nem értek a programozáshoz.
  Hogy lehetne ezt megvalósitani?

  /* YourDuino Example: 8-channel Solid State Relay Board
  This board is "active high".
  terry@yourduino.com */

  /*-----( Import needed libraries )-----*/
  /*-----( Declare Constants )-----*/
  #define RELAY_ON 1
  #define RELAY_OFF 0

  #define Relay_1 2 // Arduino Digital I/O pin number
  #define Relay_2 3
  #define Relay_3 4
  #define Relay_4 5
  #define Relay_5 6
  #define Relay_6 7
  #define Relay_7 8
  #define Relay_8 9
  /*-----( Declare objects )-----*/
  /*-----( Declare Variables )-----*/
  int waittime; // Delay between changes
  void setup() /****** SETUP: RUNS ONCE ******/
  {
  waittime = 1000;
  //-------( Initialize Pins so relays are inactive at reset)----
  digitalWrite(Relay_1, RELAY_OFF);
  digitalWrite(Relay_2, RELAY_OFF);
  digitalWrite(Relay_3, RELAY_OFF);
  digitalWrite(Relay_4, RELAY_OFF);
  digitalWrite(Relay_5, RELAY_OFF);
  digitalWrite(Relay_6, RELAY_OFF);
  digitalWrite(Relay_7, RELAY_OFF);
  digitalWrite(Relay_8, RELAY_OFF);

  //---( THEN set pins as outputs )----
  pinMode(Relay_1, OUTPUT);
  pinMode(Relay_2, OUTPUT);
  pinMode(Relay_3, OUTPUT);
  pinMode(Relay_4, OUTPUT);
  pinMode(Relay_5, OUTPUT);
  pinMode(Relay_6, OUTPUT);
  pinMode(Relay_7, OUTPUT);
  pinMode(Relay_8, OUTPUT);
  delay(4000); //Check that all relays are inactive at Reset

  }//--(end setup )---

  void loop() /****** LOOP: RUNS CONSTANTLY ******/
  {
  //---( Turn all 8 relays ON in sequence)---
  digitalWrite(Relay_1, RELAY_ON);// set the Relay ON
  delay(waittime); // wait for a second
  digitalWrite(Relay_2, RELAY_ON);// set the Relay ON
  delay(waittime); // wait for a second
  digitalWrite(Relay_3, RELAY_ON);// set the Relay ON
  delay(waittime); // wait for a second
  digitalWrite(Relay_4, RELAY_ON);// set the Relay ON
  delay(waittime);
  digitalWrite(Relay_5, RELAY_ON);// set the Relay ON
  delay(waittime); // wait for a second
  digitalWrite(Relay_6, RELAY_ON);// set the Relay ON
  delay(waittime); // wait for a second
  digitalWrite(Relay_7, RELAY_ON);// set the Relay ON
  delay(waittime); // wait for a second
  digitalWrite(Relay_8, RELAY_ON);// set the Relay ON
  delay(waittime * 4); // wait see all relays ON

  //---( Turn all 8 relays OFF in sequence)---
  digitalWrite(Relay_1, RELAY_OFF);// set the Relay OFF
  delay(waittime); // wait for a second
  digitalWrite(Relay_2, RELAY_OFF);// set the Relay OFF
  delay(waittime); // wait for a second
  digitalWrite(Relay_3, RELAY_OFF);// set the Relay OFF
  delay(waittime); // wait for a second
  digitalWrite(Relay_4, RELAY_OFF);// set the Relay OFF
  delay(waittime);
  digitalWrite(Relay_5, RELAY_OFF);// set the Relay OFF
  delay(waittime); // wait for a second
  digitalWrite(Relay_6, RELAY_OFF);// set the Relay OFF
  delay(waittime); // wait for a second
  digitalWrite(Relay_7, RELAY_OFF);// set the Relay OFF
  delay(waittime); // wait for a second
  digitalWrite(Relay_8, RELAY_OFF);// set the Relay OFF
  delay(waittime * 4); // wait see all relays OFF

  }//--(end main loop )---

  //*********( THE END )***********

Új hozzászólás Aktív témák