Új hozzászólás Aktív témák

• #149 holloo csendes tag

  Új Válasz 2021-05-04 23:04:42 #149

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  holloo

  csendes tag

  Nekem ez működött Canon MP140-nél:

  http://resetprinters.com/how-to-reset-canon-mp-series-printers-and-fix-common-errors/

  How to Reset Canon MP Series Printers and Fix Common Errors
  List of Canon Mp Series Printers:
  canon mp830
  canon mp780
  canon mp640
  canon mp620
  canon mp610
  canon mp600
  canon mp560
  canon mp530
  canon mp520
  canon mp510
  canon mp500
  canon mp490
  canon mp470
  canon mp460
  canon mp280
  canon mp270
  canon mp258
  canon mp250
  canon mp240
  canon mp210
  canon mp198
  canon mp190
  canon mp160
  canon mp150
  canon mp145
  canon mp140
  Common Canon MP Error Messages:
  P02 (Carriage error)
  P03 (Line feed error)
  P05 (ASF sensor error)
  P06 (Internal temperature error)
  P07 (Ink absorber full): the Ink Wastepad (sponge) inside the printer is full.
  P08 (Print head temperature rise error)
  P09 (EEPROM error): – The logic board need to be replaced for this one.
  P15 (USB VBUS over current)
  P20 (Other hardware error
  P22 (Scanner error)
  E13 or E16: Ink has run out. Press the Stop / Reset button for 5 to 8 seconds until the led screen display number 1.
  E04, E05, E14 or E15: Cartridge may not be installed properly. Reinstall the ink cartridge.
  E2-2 = No paper (ASF)
  E3-3 = Paper jam
  E4 = No ink
  E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
  E8 = Waste ink absorber full, or platen waste ink absorber full
  E9 = The connected digital camera / video camera does not support Camera Direct Printing
  E14 = The Ink cartridges whose destination are wrong
  E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
  E16-E19 = Failed to scan head alignment sheet
  E22 = Carriage error
  E23 = Paper feed error
  E24 = Purge unit error
  E25 = ASF(cam) sensor error
  E26 = Internal temperature rise error
  E27 = Waste ink absorber full or platen waste ink absorber full
  E28 = Ink cartridge temperature rise error –
  E29 = EEPROM error
  E33 = Paper feed position error
  E35 15 = USB Host VBUD overcurrent error – USB
  E37 17 = Abnormal motor driver error
  E40 20 = Other hardware error
  E42 22 = Scanner error
  Reset Procedure:
  Turn ON the printer.
  Press and Hold the “Reset button” on the printer.
  While pressing the “Reset button“, press and hold the “Color Start” button.
  Wait for 5 seconds.
  Release the “Color Start” button, and then release the “Reset Button“.
  Wait until the printer starts to configure itself. This should take approximately around 20 seconds.
  The no. “1” should be on the display, press and hold the “Tool” button and the letter “A” should now be on the display.
  While pressing on the “Tool” button, press and hold the “Reset button“.
  Wait util there are no more blinking lights on the printer.
  Release the “Tool” button, and then release the “Reset Button“.

Új hozzászólás Aktív témák