-
Fototrend
Amit érdemes tudni a Raspberry Pi-kről:
A legelső változat 2012-ben jelent meg. Pici, olcsó és nagyon alacsony fogyasztású, hobby-célú kártyagép. Felépítése ARM alapú, nem PC-architektúra, hanem kb. egy régi mobilhoz hasonló. Nagyon sok mindenre használható! A Linux-nak és a magas eladási mennyiségnek köszönhetően jelentős fejlesztőtáborral rendelkezik.
Új hozzászólás Aktív témák
-
#14248
Szita1
tag
Sk8erPeter
#14176
Szita1
tag
válasz
Sk8erPeter
#14176
üzenetére
Köszi a kritikát, amin tudtam javítottam.
-
Szita1
tag
Rpi ből épített lakás vezérlő
Androidra ajtónyitás jelzés GCM üzenettel.
-
Szita1
tag
Sziasztok, rpi csomagtelepítésnél ez a hibaüzi fogadott, nem tudom hogy tudom javítani. Mi lehet a baj? megoldás?
üzi:
dpkg: unrecoverable fatal error, aborting:
files list file for package 'libsemanage-common' is missing final newline
E: Sub-process /usr/bin/dpkg returned an error code (2) -
Szita1
tag
Ezeket az infókat szedtem ki most:
arm: frequency(45)=950100000
core: frequency(1)=250000000
h264: frequency(28)=250000000
isp: frequency(42)=249999000
v3d: frequency(43)=250000000
uart: frequency(22)=3000000
pwm: frequency(25)=0
emmc: frequency(47)=100000000
pixel: frequency(29)=0
vec: frequency(10)=108000000
hdmi: frequency(9)=0
dpi: frequency(4)=0core: volt=1.35V
sdram_c: volt=1.20V
sdram_i: volt=1.20V
sdram_p: volt=1.23Vvcgencmd measure_temp
temp=49.2'C -
Szita1
tag
Sziasztok, érdeklődnék mi a megoldás arra, hogy ne fagyon le a rendszer? néha semmit se lehet csinálni, putty is hibákat ír ki, nem reagál semmire sem.
Lehet egy olyan megoldás, ha újraindítom kihúzással akkor visszaáll egy alap állapotra?? Nem vagyok egy Linux guru, csak ötletelek a megoldáson.
Vagy egy USB pendriveról visszaállítás??
A segítséget előre is köszönöm.
-
Szita1
tag
A küldött (sendTelegram(code) értékére lennék kiváncsi, hogy tudom ezt kiszámolni?? :S
receivedCode=530713;
period=125;//Copy the received code.
code = receivedCode & 0xFFFFF; //truncate to 20 bits for show; receivedCode is never more than 20 bits..//Add the period duration to the code. Range: [0..511] (9 bit)
code |= (unsigned long)period << 23;//Add the number of repeats to the code. Range: [0..7] (3 bit). The actual number of repeats will be 2^(repeats),
//in this case 8
code |= 3L << 20;//Retransmit the signal on pin 11. Note: no object was created!
RemoteTransmitter::sendTelegram(code,10);Ha ez sikerülne talán RCSwitchel tudnám küldeni a helyes kódot.
-
Szita1
tag
még hosszabb hibalista :S
pi@raspberrypi ~/433Utils $ make
g++ -c -o RemoteTransmitter.o RemoteTransmitter.cpp
RemoteTransmitter.cpp: In static member function ‘static void RemoteReceiver::init(int8_t, byte, RemoteReceiverCallBack)’:
RemoteTransmitter.cpp:29:55: error: ‘attachInterrupt’ was not declared in this scope
RemoteTransmitter.cpp: In static member function ‘static void RemoteReceiver::deinit()’:
RemoteTransmitter.cpp:45:29: error: ‘detachInterrupt’ was not declared in this scope
RemoteTransmitter.cpp: In static member function ‘static void RemoteReceiver::interruptHandler()’:
RemoteTransmitter.cpp:104:19: error: ‘B1110’ was not declared in this scope
RemoteTransmitter.cpp:107:19: error: ‘B1’ was not declared in this scope
RemoteTransmitter.cpp:119:26: error: ‘B1111’ was not declared in this scope
RemoteTransmitter.cpp:120:10: error: ‘B0101’ was not declared in this scope
RemoteTransmitter.cpp:124:10: error: ‘B1010’ was not declared in this scope
RemoteTransmitter.cpp:128:10: error: ‘B0110’ was not declared in this scope
make: *** [RemoteTransmitter.o] Error 1Nem értem Aurdinon gond nélkül ment
Pedig csak a sendTelegram kéne belőle valahogy, kár hogy a RCSwitch.cpp nem tud ilyet küldeni ... -
-
Szita1
tag
Itt a hibaüzi :
g++ -c -o RemoteTransmitter.o RemoteTransmitter.cpp
RemoteTransmitter.cpp: In static member function ‘static void RemoteTransmitter::sendTelegram(long unsigned int, byte)’:
RemoteTransmitter.cpp:54:47: error: ‘B111’ was not declared in this scope
RemoteTransmitter.cpp: In static member function ‘static void RemoteTransmitter::sendCode(byte, long unsigned int, unsigned int, byte)’:
RemoteTransmitter.cpp:72:28: error: ‘B111’ was not declared in this scope
RemoteTransmitter.cpp:80:19: error: ‘B11’ was not declared in this scope
make: *** [RemoteTransmitter.o] Error 1Mi baja lehet? :S
-
Szita1
tag
/*
* RemoteSwitch library v2.3.0 (20121229) made by Randy Simons http://randysimons.nl/
* See RemoteReceiver.h for details.
*
* License: GPLv3. See license.txt
*/
#include "RemoteReceiver.h"
/************
* RemoteReceiver
************/
int8_t RemoteReceiver::_interrupt;
volatile int8_t RemoteReceiver::_state;
byte RemoteReceiver::_minRepeats;
RemoteReceiverCallBack RemoteReceiver::_callback;
boolean RemoteReceiver::_inCallback = false;
boolean RemoteReceiver::_enabled = false;
void RemoteReceiver::init(int8_t interrupt, byte minRepeats, RemoteReceiverCallBack callback) {
_interrupt = interrupt;
_minRepeats = minRepeats;
_callback = callback;
enable();
if (_interrupt >= 0) {
attachInterrupt(_interrupt, interruptHandler, CHANGE);
}
}
void RemoteReceiver::enable() {
_state = -1;
_enabled = true;
}
void RemoteReceiver::disable() {
_enabled = false;
}
void RemoteReceiver::deinit() {
_enabled = false;
if (_interrupt >= 0) {
detachInterrupt(_interrupt);
}
}
void RemoteReceiver::interruptHandler() {
if (!_enabled) {
return;
}
static unsigned int period; // Calculated duration of 1 period
static byte receivedBit; // Contains "bit" currently receiving
static unsigned long receivedCode; // Contains received code
static unsigned long previousCode; // Contains previous received code
static byte repeats = 0; // The number of times the an identical code is received in a row.
static unsigned long edgeTimeStamp[3] = {0, }; // Timestamp of edges
static unsigned int min1Period, max1Period, min3Period, max3Period;
static bool skip;
// Filter out too short pulses. This method works as a low pass filter.
edgeTimeStamp[1] = edgeTimeStamp[2];
edgeTimeStamp[2] = micros();
if (skip) {
skip = false;
return;
}
if (_state >= 0 && edgeTimeStamp[2]-edgeTimeStamp[1] < min1Period) {
// Last edge was too short.
// Skip this edge, and the next too.
skip = true;
return;
}
unsigned int duration = edgeTimeStamp[1] - edgeTimeStamp[0];
edgeTimeStamp[0] = edgeTimeStamp[1];
// Note that if state>=0, duration is always >= 1 period.
if (_state==-1) { // Waiting for sync-signal
if (duration>3720) { // =31*120 minimal time between two edges before decoding starts.
// Sync signal received.. Preparing for decoding
period=duration/31;
receivedCode=previousCode=repeats=0;
// Allow for large error-margin. ElCheapo-hardware :(
min1Period=period*4/10; // Avoid floating point math; saves memory.
max1Period=period*16/10;
min3Period=period*23/10;
max3Period=period*37/10;
}
else {
return;
}
} else if (_state<48) { // Decoding message
receivedBit <<= 1;
// bit part durations can ONLY be 1 or 3 periods.
if (duration<=max1Period) {
receivedBit &= B1110; // Clear LSB of receivedBit
}
else if (duration>=min3Period && duration<=max3Period) {
receivedBit |= B1; // Set LSB of receivedBit
}
else { // Otherwise the entire sequence is invalid
_state=-1;
return;
}
if ((_state%4)==3) { // Last bit part?
// Shift
receivedCode*=3;
// Only 4 LSB's are used; trim the rest.
switch (receivedBit & B1111) {
case B0101: // short long short long == B0101
// bit "0" received
receivedCode+=0; // I hope the optimizer handles this ;)
break;
case B1010: // long short long short == B1010
// bit "1" received
receivedCode+=1;
break;
case B0110: // short long long short
// bit "f" received
receivedCode+=2;
break;
default:
// Bit was rubbish. Abort.
_state=-1;
return;
}
}
} else if (_state==48) { // Waiting for sync bit part 1
// Must be 1 period.
if (duration>max1Period) {
_state=-1;
return;
}
} else { // Waiting for sync bit part 2
// Must be 31 periods.
if (duration<period*25 || duration>period*36) {
_state=-1;
return;
}
// receivedCode is a valid code!
if (receivedCode!=previousCode) {
repeats=0;
previousCode=receivedCode;
}
repeats++;
if (repeats>=_minRepeats) {
if (!_inCallback) {
_inCallback = true;
(_callback)(receivedCode, period);
_inCallback = false;
}
// Reset after callback.
_state=-1;
return;
}
// Reset for next round
receivedCode = 0;
_state=0; // no need to wait for another sync-bit!
return;
}
_state++;
return;
}
boolean RemoteReceiver::isReceiving(int waitMillis) {
unsigned long startTime=millis();
int waited; // Signed int!
do {
if (_state == 48) { // Abort if a valid code has been received in the mean time
return true;
}
waited = (millis()-startTime);
} while(waited>=0 && waited <= waitMillis); // Yes, clock wraps every 50 days. And then you'd have to wait for a looooong time.
return false;
}
Pedig csak a sendTelegram kéne belőle valahogy, kár hogy a RCSwitch.cpp nem tud ilyet küldeni ...
Új hozzászólás Aktív témák
wassermann- AMD Ryzen 9 / 7 / 5 / 3 5***(X) "Zen 3" (AM4)
- PlayStation 5
- Suzuki topik
- A megszokottól eltérő képaránnyal jön a JapanNext monitora
- Mikrotik routerek
- Samsung Galaxy S25 Ultra - titán keret, acélos teljesítmény
- E-book olvasók
- Villanyszerelés
- PlayStation 3
- Audi, Cupra, Seat, Skoda, Volkswagen topik
- További aktív témák...
- Felsőkategóriás Gamer PC-Számítógép! Csere-Beszámítás! 7800X3D / RTX 5070 / 32GB DDR5 / 2TB SSD!
- Gamer PC-Számítógép! Csere-Beszámítás! I7 6700 / RTX 2060 12GB / 16GB DDR4 / 500 GB SSD
- 15.gen! Intel Core ULTRA 9 285K (24mag!) +32GB DDR5 +hűtött VRM-es Z890 lap! GAR/SZÁMLA (Te nevedre)
- Mini PC (ITX) i7 265K 9070 XT 32 GB DDR5 8000Mhz
- Asztali PC , i7 9700 , RX 6600 XT , 16GB DDR4 , 512GB m.2 , 1TB HDD
- Telefon felvásárlás!! Apple iPhone SE (2016), Apple iPhone SE2 (2020), Apple iPhone SE3 (2022)
- BESZÁMÍTÁS! 16GB G.SKILL Trident Z 4000MHz DDR4 memória garanciával hibátlan működéssel
- Apple iPhone 13 Pro 128GB,Átlagos,Dobozaval,12 hónap garanciával
- TELJES KÖRŰ IT BESZERZÉS
- Használt Steelseries Arctis 7P+ vezeték nélküli gaming headset / 12 hó jótállás
Állásajánlatok
Cég: Laptopműhely Bt.
Város: Budapest