Új hozzászólás Aktív témák

• #99137 Benőke őstag ubyegon2 #99114

  Új Válasz 2024-10-09 20:30:53 #99137

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Benőke

  őstag

  válasz ubyegon2 #99114 üzenetére

  CPU hőfokokkal nincs gond 35-40 fok környéke. Csak a venti pörög mint a bolond óra.
  Gondolom mert látta az ssd hőmérsékletét, és lehet ezért.
  Mint már ezt eleve jobban kezelte de gyorsan emelte viszont lassan csökkentette a venti fordulatszámát.

  Alvás funkciót BIOS ban a "Block Sleep" kikapcsolásával tudtam elérni. Dell leírások alapján. Azóta a win is elalszik. Fogalmam sincs miért kapcsolja ki valaki de mindegy is.
  Most viszont hogy a mint et próbálgattam a sensos-detect -et figyelmesen nyomkodtam végig, és bingó. Valamit ez sem lát.
  Mint alatt is süt az ssd

  sensors-detect:
  Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     Yes
Found unknown chip with ID 0x3684
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Found unknown SMBus adapter 8086:a0a3 at 0000:00:1f.4.
Sorry, no supported PCI bus adapters found.
Next adapter: Synopsys DesignWare I2C adapter (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Adapter doesn't support all probing functions.
Some addresses won't be probed.
Next adapter: Synopsys DesignWare I2C adapter (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Adapter doesn't support all probing functions.
Some addresses won't be probed.
Client at address 0x2c can not be probed - unload all client drivers first!
Next adapter: SMBus I801 adapter at efa0 (i2c-2)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Handled by driver `ee1004' (already loaded), chip type `ee1004'
    (note: this is probably NOT a sensor chip!)
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)

  sensors:
  ucsi_source_psy_USBC000:002-isa-0000
Adapter: ISA adapter
in0:           5.00 V  (min =  +5.00 V, max =  +5.00 V)
curr1:         0.00 A  (max =  +0.00 A)

  dell_smm-virtual-0
Adapter: Virtual device
fan1:        1304 RPM  (min =    0 RPM, max = 4600 RPM)
temp1:        +41.0°C  
temp2:        +37.0°C  
temp3:        +31.0°C  
temp4:        +33.0°C  
temp5:        +42.0°C  
temp6:        +26.0°C  

  ucsi_source_psy_USBC000:001-isa-0000
Adapter: ISA adapter
in0:          20.00 V  (min =  +5.00 V, max = +20.00 V)
curr1:         4.50 A  (max =  +4.50 A)

  nvme-pci-0100
Adapter: PCI adapter
Composite:    +55.9°C  (low  = -20.1°C, high = +83.8°C)
                       (crit = +88.8°C)
Sensor 2:     +74.8°C  

  iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +34.0°C  

  coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +41.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +41.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +38.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +39.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +38.0°C  (high = +100.0°C, crit = +100.0°C)

  nvme-pci-7300
Adapter: PCI adapter
Composite:    +39.9°C  (low  =  -0.1°C, high = +82.8°C)
                       (crit = +84.8°C)
Sensor 1:     +32.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +35.9°C  (low  = -273.1°C, high = +65261.8°C)

  BAT0-acpi-0
Adapter: ACPI interface
in0:          11.86 V  
curr1:       1000.00 uA

  Úgy nézem a KC3000 -t nem szereti
  Drives:
  Local Storage: total: 1.4 TiB used: 12.67 GiB (0.9%)
  ID-1: /dev/nvme0n1 vendor: Kingston model: SKC3000S1024G size: 953.87 GiB speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: EIFK51.2 temp: 56.9 C scheme: GPT
  ID-2: /dev/nvme1n1 vendor: SK Hynix model: PC711 NVMe 512GB size: 476.94 GiB speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 41001131 temp: 42.9 C scheme: GPT

Új hozzászólás Aktív témák