Aktív témák

  • Pizzafutar
    aktív tag

    mire gondolsz ha azt felrakom minden okés lenne vagy nem?
    azért nyomtam bele mindet hogy ti guruk is lássátok mi a helyzet
    de remélem nem lesz belőle gubanc
    először megyek az alsára
    a 097c alsa tuti támogatja csak azt nem tudom felrakni mert szerintem nem suse hoz készült mert egy csomó filet nem talál meg ilyenek

    Egy kicsit keresgeltem a googlen. Az erdmeny:

    http://packman.links2linux.de/
    majd a systemre kattintav:
    http://packman.links2linux.de/index.php4?action=cat&cat=9

    itt az alsa:
    alsa-1.0.3b-0.pm.0.i586.rpm: http://packman.links2linux.de/download.php?t=b&id=4091
    ez remélem a drivert-t és a lib-et is tartalmaza!

    alsa-tools:
    alsa-tools-1.0.3-0.pm.0.i586.rpm http://packman.links2linux.de/download.php?t=b&id=4001

    Mivel nincs susem, semmi garanciat nem tudok vallani, hogy ezek mukodnek is!
    Mindenestre ha valakinek gondot jelent a forditas, egyszerubb ha ezt elobb kiprobalja!

    meg valami:
    Letzes Update: 14.03.04 12:49

    Opsz:
    Belenezve a DISTRIBUTION-ba:
    Suse Linux-9.0(i586)
    viszont lehet hogy ezek csak libek?

    [Szerkesztve]

  • proximus
    senior tag

    mire gondolsz ha azt felrakom minden okés lenne vagy nem?
    azért nyomtam bele mindet hogy ti guruk is lássátok mi a helyzet
    de remélem nem lesz belőle gubanc
    először megyek az alsára
    a 097c alsa tuti támogatja csak azt nem tudom felrakni mert szerintem nem suse hoz készült mert egy csomó filet nem talál meg ilyenek

    Válaszolok én.:)
    1. Ha a fordítás még mindíg elakad, és van ilyen csomagod, akkor azt ajánlatos feltenni, főleg mert amit beszúrtál, az is gyanúsan az iclude fájlokkal problémázik, ami ha így külön van választva a SuSe -ben, akkor a kernel-headers csomi-ban van.
    2. Legyen fent a kernel-source is (=kernel forrás, abból is az architektúrádnak megfelelő,ha van ilyen, pl.: i386, i586, p4, vagy athlon)
    3. A /usr/src/ -ben ha már fönt van a kernel -forrás könyvtár, és csak ez az egy ''valami'' található itt, akkor csinálnod kell egy szim-linket a kernel_verzió -ról linux néven így:
    cd /usr/src
    ln -s kernel_verzió linux
    4. na most próbáld ezzel:
    ./configure --with-cards=au8830 --with-sequencer=yes --with-oss=yes
    make
    make install

  • proximus
    senior tag

    OK
    Felraktam csomagból az alsat 069 valamelyiket
    de ebben nem találom a snd filet
    sehol
    végignyomtamkeresővel az egész lemezet de nincs sehol
    hogyan tudom felrakni tarból normálisan ha a gyökérbe kicsomagolom és miből tudom hogy jó lett-e?
    a yastal tudom megnézni hogy sikerült e a telepítés

    Próbáld ki úgy, hogy az mc -ben (ha nem ismered: Midnight Commander fájlkezelő) entert nyomsz az rpm fájlra, vagyis belelépsz, és megnézed hogy van -e egyáltalán benne valami, és hova való.:)
    A tar -nál más a helyzet, mert azt nem ''te teszed fel'', hanem a fordítás utolsó fázisaként a make install parancs.

  • Vangelis
    félisten

    Ha van a suseban olyan csomag, hogy kernel-headers-[verzio] rakd fel!

    [Szerkesztve]

    mire gondolsz ha azt felrakom minden okés lenne vagy nem?
    azért nyomtam bele mindet hogy ti guruk is lássátok mi a helyzet
    de remélem nem lesz belőle gubanc
    először megyek az alsára
    a 097c alsa tuti támogatja csak azt nem tudom felrakni mert szerintem nem suse hoz készült mert egy csomó filet nem talál meg ilyenek

  • Vangelis
    félisten

    Egyetértek, bár erre mintha már utaltunk volna:), visszont valahol megértem az izgalmat.

    OK
    Felraktam csomagból az alsat 069 valamelyiket
    de ebben nem találom a snd filet
    sehol
    végignyomtamkeresővel az egész lemezet de nincs sehol
    hogyan tudom felrakni tarból normálisan ha a gyökérbe kicsomagolom és miből tudom hogy jó lett-e?
    a yastal tudom megnézni hogy sikerült e a telepítés

  • proximus
    senior tag

    Ha van a suseban olyan csomag, hogy kernel-headers-[verzio] rakd fel!

    [Szerkesztve]

    Egyetértek, bár erre mintha már utaltunk volna:), visszont valahol megértem az izgalmat.

  • proximus
    senior tag

    ja és van egy ilyen ez kimondottan aureal valami de ezt csinálja
    linux:~/aureal # make install
    cc -D__KERNEL__ -D__SMP__ -DMODULE -DAU8830 -mpentium -O6
    -fomit-frame-pointer
    -Wall -pipe -I/usr/src/linux/include -c -o au_audio.o au_audio.c
    `-mpentium' is deprecated. Use `-march=pentium' or `-mcpu=pentium' instead.
    In file included from au_vortex.h:44,
    from au_audio.c:49:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    In file included from au_audio.c:49:
    au_vortex.h:46:40: missing binary operator before token ''(''
    au_vortex.h:50:28: linux/autoconf.h: Nincs ilyen fájl vagy könyvtár
    In file included from /usr/include/linux/module.h:20,
    from au_vortex.h:58,
    from au_audio.c:49:
    /usr/include/asm/module.h:54:2: #error unknown processor family
    In file included from au_vortex.h:59,
    from au_audio.c:49:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    In file included from au_audio.c:49:
    au_vortex.h:66:26: linux/malloc.h: Nincs ilyen fájl vagy könyvtár
    In file included from /usr/include/linux/mm.h:205,
    from /usr/include/asm/pci.h:7,
    from /usr/include/linux/pci.h:677,
    from au_vortex.h:68,
    from au_audio.c:49:
    /usr/include/linux/page-flags.h:119: error: `CONFIG_X86_L1_CACHE_SHIFT'
    undeclar
    ed here (not in a function)
    /usr/include/linux/page-flags.h:119: error: requested alignment is not a
    constan
    t
    au_vortex.h:74:41: missing binary operator before token ''(''
    In file included from au_vortex.h:77,
    from au_audio.c:49:
    /usr/include/asm/spinlock.h:22: error: conflicting types for `spinlock_t'
    /usr/include/linux/spinlock.h:152: error: previous declaration of `spinlock_t'
    /usr/include/asm/spinlock.h:71: error: parse error before ''do''
    /usr/include/asm/spinlock.h:103: error: parse error before ''void''
    /usr/include/asm/spinlock.h:113: error: parse error before ''do''
    /usr/include/asm/spinlock.h:144: error: conflicting types for `rwlock_t'
    /usr/include/linux/spinlock.h:173: error: previous declaration of `rwlock_t'
    /usr/include/asm/spinlock.h:171: error: parse error before ''do''
    /usr/include/asm/spinlock.h:179: error: parse error before ''do''
    /usr/include/asm/spinlock.h:190: error: parse error before '{' token
    /usr/include/asm/spinlock.h:195: error: parse error before numeric constant
    /usr/include/asm/spinlock.h:195: error: conflicting types for `atomic_add'
    /usr/include/asm/atomic.h:48: error: previous declaration of `atomic_add'
    au_vortex.h:80:41: missing binary operator before token ''(''
    au_vortex.h:118:41: missing binary operator before token ''(''
    au_vortex.h:146:41: missing binary operator before token ''(''
    au_vortex.h:197:41: missing binary operator before token ''(''
    In file included from au_audio.c:50:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    au_audio.c:63:41: missing binary operator before token ''(''
    au_audio.c:78: warning: initialization from incompatible pointer type
    au_audio.c:79: warning: initialization from incompatible pointer type
    au_audio.c:80: warning: initialization from incompatible pointer type
    au_audio.c:82: warning: initialization from incompatible pointer type
    au_audio.c:83: warning: initialization from incompatible pointer type
    au_audio.c:84: warning: initialization from incompatible pointer type
    au_audio.c:85: warning: initialization from incompatible pointer type
    au_audio.c:87: warning: initialization from incompatible pointer type
    au_audio.c: In function `au_audio_read':
    au_audio.c:193: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c: In function `au_audio_write':
    au_audio.c:261: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c: In function `au_audio_poll':
    au_audio.c:311: warning: passing arg 2 of `poll_wait' from incompatible
    pointer
    type
    au_audio.c:313: warning: passing arg 2 of `poll_wait' from incompatible
    pointer
    type
    au_audio.c:606:41: missing binary operator before token ''(''
    au_audio.c: In function `au_audio_mmap':
    au_audio.c:609: error: structure has no member named `vm_offset'
    au_audio.c:620: warning: passing arg 1 of `remap_page_range' makes pointer
    from
    integer without a cast
    au_audio.c:620: error: incompatible type for argument 4 of `remap_page_range'
    au_audio.c:620: error: too few arguments to function `remap_page_range'
    au_audio.c:630: warning: passing arg 1 of `remap_page_range' makes pointer
    from
    integer without a cast
    au_audio.c:630: error: incompatible type for argument 4 of `remap_page_range'
    au_audio.c:630: error: too few arguments to function `remap_page_range'
    au_audio.c: In function `au_audio_open':
    au_audio.c:650: error: invalid operands to binary &
    au_audio.c:666:40: missing binary operator before token ''(''
    au_audio.c:690:40: missing binary operator before token ''(''
    au_audio.c: In function `drain_playback':
    au_audio.c:724: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c:767:41: missing binary operator before token ''(''
    au_audio.c: In function `add_wave_device':
    au_audio.c:771: warning: implicit declaration of function `init_waitqueue'
    au_audio.c:825:41: missing binary operator before token ''(''
    au_audio.c:838:41: missing binary operator before token ''(''
    au_audio.c: In function `get_frags':
    au_audio.c:843: warning: implicit declaration of function `MAP_NR'
    au_audio.c:859:41: missing binary operator before token ''(''
    au_audio.c:867:41: missing binary operator before token ''(''
    au_audio.c:879:41: missing binary operator before token ''(''
    au_audio.c: In function `set_data_format':
    au_audio.c:962: warning: deprecated use of label at end of compound statement
    au_audio.c: In function `au_handle_timer':
    au_audio.c:1121: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    au_audio.c:1143: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    au_audio.c:1173: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    make: *** [au_audio.o] Error 1
    Gondolom ez nem valami jó lehet?!

    0. Íjj, azanyámszencsígit, emmeg mi lenne? Moderátoridegek tesztelése?:D :D
    1. Szerintem ha látod majd az ALSA -t menet közben, nem fog neked kelleni az aureal féle driver.:))
    2. Szerintem egyszerre csak egyet csináljunk, ami legyen most az ALSA, ha nem megy, akkor jöhet a következő.:)

  • Pizzafutar
    aktív tag

    ja és van egy ilyen ez kimondottan aureal valami de ezt csinálja
    linux:~/aureal # make install
    cc -D__KERNEL__ -D__SMP__ -DMODULE -DAU8830 -mpentium -O6
    -fomit-frame-pointer
    -Wall -pipe -I/usr/src/linux/include -c -o au_audio.o au_audio.c
    `-mpentium' is deprecated. Use `-march=pentium' or `-mcpu=pentium' instead.
    In file included from au_vortex.h:44,
    from au_audio.c:49:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    In file included from au_audio.c:49:
    au_vortex.h:46:40: missing binary operator before token ''(''
    au_vortex.h:50:28: linux/autoconf.h: Nincs ilyen fájl vagy könyvtár
    In file included from /usr/include/linux/module.h:20,
    from au_vortex.h:58,
    from au_audio.c:49:
    /usr/include/asm/module.h:54:2: #error unknown processor family
    In file included from au_vortex.h:59,
    from au_audio.c:49:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    In file included from au_audio.c:49:
    au_vortex.h:66:26: linux/malloc.h: Nincs ilyen fájl vagy könyvtár
    In file included from /usr/include/linux/mm.h:205,
    from /usr/include/asm/pci.h:7,
    from /usr/include/linux/pci.h:677,
    from au_vortex.h:68,
    from au_audio.c:49:
    /usr/include/linux/page-flags.h:119: error: `CONFIG_X86_L1_CACHE_SHIFT'
    undeclar
    ed here (not in a function)
    /usr/include/linux/page-flags.h:119: error: requested alignment is not a
    constan
    t
    au_vortex.h:74:41: missing binary operator before token ''(''
    In file included from au_vortex.h:77,
    from au_audio.c:49:
    /usr/include/asm/spinlock.h:22: error: conflicting types for `spinlock_t'
    /usr/include/linux/spinlock.h:152: error: previous declaration of `spinlock_t'
    /usr/include/asm/spinlock.h:71: error: parse error before ''do''
    /usr/include/asm/spinlock.h:103: error: parse error before ''void''
    /usr/include/asm/spinlock.h:113: error: parse error before ''do''
    /usr/include/asm/spinlock.h:144: error: conflicting types for `rwlock_t'
    /usr/include/linux/spinlock.h:173: error: previous declaration of `rwlock_t'
    /usr/include/asm/spinlock.h:171: error: parse error before ''do''
    /usr/include/asm/spinlock.h:179: error: parse error before ''do''
    /usr/include/asm/spinlock.h:190: error: parse error before '{' token
    /usr/include/asm/spinlock.h:195: error: parse error before numeric constant
    /usr/include/asm/spinlock.h:195: error: conflicting types for `atomic_add'
    /usr/include/asm/atomic.h:48: error: previous declaration of `atomic_add'
    au_vortex.h:80:41: missing binary operator before token ''(''
    au_vortex.h:118:41: missing binary operator before token ''(''
    au_vortex.h:146:41: missing binary operator before token ''(''
    au_vortex.h:197:41: missing binary operator before token ''(''
    In file included from au_audio.c:50:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    au_audio.c:63:41: missing binary operator before token ''(''
    au_audio.c:78: warning: initialization from incompatible pointer type
    au_audio.c:79: warning: initialization from incompatible pointer type
    au_audio.c:80: warning: initialization from incompatible pointer type
    au_audio.c:82: warning: initialization from incompatible pointer type
    au_audio.c:83: warning: initialization from incompatible pointer type
    au_audio.c:84: warning: initialization from incompatible pointer type
    au_audio.c:85: warning: initialization from incompatible pointer type
    au_audio.c:87: warning: initialization from incompatible pointer type
    au_audio.c: In function `au_audio_read':
    au_audio.c:193: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c: In function `au_audio_write':
    au_audio.c:261: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c: In function `au_audio_poll':
    au_audio.c:311: warning: passing arg 2 of `poll_wait' from incompatible
    pointer
    type
    au_audio.c:313: warning: passing arg 2 of `poll_wait' from incompatible
    pointer
    type
    au_audio.c:606:41: missing binary operator before token ''(''
    au_audio.c: In function `au_audio_mmap':
    au_audio.c:609: error: structure has no member named `vm_offset'
    au_audio.c:620: warning: passing arg 1 of `remap_page_range' makes pointer
    from
    integer without a cast
    au_audio.c:620: error: incompatible type for argument 4 of `remap_page_range'
    au_audio.c:620: error: too few arguments to function `remap_page_range'
    au_audio.c:630: warning: passing arg 1 of `remap_page_range' makes pointer
    from
    integer without a cast
    au_audio.c:630: error: incompatible type for argument 4 of `remap_page_range'
    au_audio.c:630: error: too few arguments to function `remap_page_range'
    au_audio.c: In function `au_audio_open':
    au_audio.c:650: error: invalid operands to binary &
    au_audio.c:666:40: missing binary operator before token ''(''
    au_audio.c:690:40: missing binary operator before token ''(''
    au_audio.c: In function `drain_playback':
    au_audio.c:724: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c:767:41: missing binary operator before token ''(''
    au_audio.c: In function `add_wave_device':
    au_audio.c:771: warning: implicit declaration of function `init_waitqueue'
    au_audio.c:825:41: missing binary operator before token ''(''
    au_audio.c:838:41: missing binary operator before token ''(''
    au_audio.c: In function `get_frags':
    au_audio.c:843: warning: implicit declaration of function `MAP_NR'
    au_audio.c:859:41: missing binary operator before token ''(''
    au_audio.c:867:41: missing binary operator before token ''(''
    au_audio.c:879:41: missing binary operator before token ''(''
    au_audio.c: In function `set_data_format':
    au_audio.c:962: warning: deprecated use of label at end of compound statement
    au_audio.c: In function `au_handle_timer':
    au_audio.c:1121: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    au_audio.c:1143: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    au_audio.c:1173: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    make: *** [au_audio.o] Error 1
    Gondolom ez nem valami jó lehet?!

    Ha van a suseban olyan csomag, hogy kernel-headers-[verzio] rakd fel!

    [Szerkesztve]

  • proximus
    senior tag

    Gond van nincs olyanom hogy au8830
    /lib/modules/2.4.21-99-athlon/kernel/sound/pci
    nekem gondolom itt volna
    nincsen
    akkor hogyan raktam fel az alsat

    No ácsi, ez most az rpm -ből feltett alsa, vagy amit fordítottál??(feltéve hogy sikerült)
    Nem mindegy, mert nem feltétlen ugyan oda teszi a /lib/..../sound -ot mindkettő.
    Lehet még itt is /lib/modules/kernel_verzió/sound <-- ide akkor kerül, ha nem a kernelből származik(2.4 -esben csak patch -ként lehet, 2.6 -os viszont eleve ''belül'' tartalmazza), hanem te fordítod külsőleg. Ez azért van, hogy nehogy keveredés legyen amiatt, hogy ugyanoda mennek.

  • Vangelis
    félisten

    ja és van egy ilyen ez kimondottan aureal valami de ezt csinálja
    linux:~/aureal # make install
    cc -D__KERNEL__ -D__SMP__ -DMODULE -DAU8830 -mpentium -O6
    -fomit-frame-pointer
    -Wall -pipe -I/usr/src/linux/include -c -o au_audio.o au_audio.c
    `-mpentium' is deprecated. Use `-march=pentium' or `-mcpu=pentium' instead.
    In file included from au_vortex.h:44,
    from au_audio.c:49:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    In file included from au_audio.c:49:
    au_vortex.h:46:40: missing binary operator before token ''(''
    au_vortex.h:50:28: linux/autoconf.h: Nincs ilyen fájl vagy könyvtár
    In file included from /usr/include/linux/module.h:20,
    from au_vortex.h:58,
    from au_audio.c:49:
    /usr/include/asm/module.h:54:2: #error unknown processor family
    In file included from au_vortex.h:59,
    from au_audio.c:49:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    In file included from au_audio.c:49:
    au_vortex.h:66:26: linux/malloc.h: Nincs ilyen fájl vagy könyvtár
    In file included from /usr/include/linux/mm.h:205,
    from /usr/include/asm/pci.h:7,
    from /usr/include/linux/pci.h:677,
    from au_vortex.h:68,
    from au_audio.c:49:
    /usr/include/linux/page-flags.h:119: error: `CONFIG_X86_L1_CACHE_SHIFT'
    undeclar
    ed here (not in a function)
    /usr/include/linux/page-flags.h:119: error: requested alignment is not a
    constan
    t
    au_vortex.h:74:41: missing binary operator before token ''(''
    In file included from au_vortex.h:77,
    from au_audio.c:49:
    /usr/include/asm/spinlock.h:22: error: conflicting types for `spinlock_t'
    /usr/include/linux/spinlock.h:152: error: previous declaration of `spinlock_t'
    /usr/include/asm/spinlock.h:71: error: parse error before ''do''
    /usr/include/asm/spinlock.h:103: error: parse error before ''void''
    /usr/include/asm/spinlock.h:113: error: parse error before ''do''
    /usr/include/asm/spinlock.h:144: error: conflicting types for `rwlock_t'
    /usr/include/linux/spinlock.h:173: error: previous declaration of `rwlock_t'
    /usr/include/asm/spinlock.h:171: error: parse error before ''do''
    /usr/include/asm/spinlock.h:179: error: parse error before ''do''
    /usr/include/asm/spinlock.h:190: error: parse error before '{' token
    /usr/include/asm/spinlock.h:195: error: parse error before numeric constant
    /usr/include/asm/spinlock.h:195: error: conflicting types for `atomic_add'
    /usr/include/asm/atomic.h:48: error: previous declaration of `atomic_add'
    au_vortex.h:80:41: missing binary operator before token ''(''
    au_vortex.h:118:41: missing binary operator before token ''(''
    au_vortex.h:146:41: missing binary operator before token ''(''
    au_vortex.h:197:41: missing binary operator before token ''(''
    In file included from au_audio.c:50:
    /usr/include/linux/version.h:2:2: #error
    ''======================================
    =================''
    /usr/include/linux/version.h:3:2: #error ''You should not include /usr/include/
    {l
    inux,asm}/ header''
    /usr/include/linux/version.h:4:2: #error ''files directly for the compilation
    of
    kernel modules.''
    /usr/include/linux/version.h:5:2: #error ''''
    /usr/include/linux/version.h:6:2: #error ''glibc now uses kernel header files
    fro
    m a well-defined''
    /usr/include/linux/version.h:7:2: #error ''working kernel version (as
    recommended
    by Linus Torvalds)''
    /usr/include/linux/version.h:8:2: #error ''These files are glibc internal and
    may
    not match the''
    /usr/include/linux/version.h:9:2: #error ''currently running kernel. They
    should
    only be''
    /usr/include/linux/version.h:10:2: #error ''included via other system header
    file
    s - user space''
    /usr/include/linux/version.h:11:2: #error ''programs should not directly
    include
    <linux/*.h> or''
    /usr/include/linux/version.h:12:2: #error ''<asm/*.h> as well.''
    /usr/include/linux/version.h:13:2: #error ''''
    /usr/include/linux/version.h:14:2: #error ''To build kernel modules please do
    the
    following:''
    /usr/include/linux/version.h:15:2: #error ''''
    /usr/include/linux/version.h:16:2: #error '' o Have the kernel sources
    installed''
    /usr/include/linux/version.h:17:2: #error ''''
    /usr/include/linux/version.h:18:2: #error '' o Make sure that the symbolic
    link''
    /usr/include/linux/version.h:19:2: #error '' /lib/modules/`uname -r`/build
    exis
    ts and points to''
    /usr/include/linux/version.h:20:2: #error '' the matching kernel source
    directo
    ry''
    /usr/include/linux/version.h:21:2: #error ''''
    /usr/include/linux/version.h:22:2: #error '' o Configure kernel sources:''
    /usr/include/linux/version.h:23:2: #error '' - cd /usr/src/linux''
    /usr/include/linux/version.h:24:2: #error '' - make mrproper''
    /usr/include/linux/version.h:25:2: #error '' - make cloneconfig''
    /usr/include/linux/version.h:26:2: #error '' - make dep''
    /usr/include/linux/version.h:27:2: #error ''''
    /usr/include/linux/version.h:28:2: #error '' o When compiling, make sure to use
    t
    he following''
    /usr/include/linux/version.h:29:2: #error '' compiler option to use the
    correct
    include files:''
    /usr/include/linux/version.h:30:2: #error ''''
    /usr/include/linux/version.h:31:2: #error '' -I/lib/modules/`uname -r`/build/
    in
    clude''
    /usr/include/linux/version.h:32:2: #error ''''
    /usr/include/linux/version.h:33:2: #error '' instead of''
    /usr/include/linux/version.h:34:2: #error ''''
    /usr/include/linux/version.h:35:2: #error '' -I/usr/include/linux''
    /usr/include/linux/version.h:36:2: #error ''''
    /usr/include/linux/version.h:37:2: #error '' Please adjust the Makefile
    accordi
    ngly.''
    /usr/include/linux/version.h:38:2: #error
    ''=====================================
    ==================''
    au_audio.c:63:41: missing binary operator before token ''(''
    au_audio.c:78: warning: initialization from incompatible pointer type
    au_audio.c:79: warning: initialization from incompatible pointer type
    au_audio.c:80: warning: initialization from incompatible pointer type
    au_audio.c:82: warning: initialization from incompatible pointer type
    au_audio.c:83: warning: initialization from incompatible pointer type
    au_audio.c:84: warning: initialization from incompatible pointer type
    au_audio.c:85: warning: initialization from incompatible pointer type
    au_audio.c:87: warning: initialization from incompatible pointer type
    au_audio.c: In function `au_audio_read':
    au_audio.c:193: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c: In function `au_audio_write':
    au_audio.c:261: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c: In function `au_audio_poll':
    au_audio.c:311: warning: passing arg 2 of `poll_wait' from incompatible
    pointer
    type
    au_audio.c:313: warning: passing arg 2 of `poll_wait' from incompatible
    pointer
    type
    au_audio.c:606:41: missing binary operator before token ''(''
    au_audio.c: In function `au_audio_mmap':
    au_audio.c:609: error: structure has no member named `vm_offset'
    au_audio.c:620: warning: passing arg 1 of `remap_page_range' makes pointer
    from
    integer without a cast
    au_audio.c:620: error: incompatible type for argument 4 of `remap_page_range'
    au_audio.c:620: error: too few arguments to function `remap_page_range'
    au_audio.c:630: warning: passing arg 1 of `remap_page_range' makes pointer
    from
    integer without a cast
    au_audio.c:630: error: incompatible type for argument 4 of `remap_page_range'
    au_audio.c:630: error: too few arguments to function `remap_page_range'
    au_audio.c: In function `au_audio_open':
    au_audio.c:650: error: invalid operands to binary &
    au_audio.c:666:40: missing binary operator before token ''(''
    au_audio.c:690:40: missing binary operator before token ''(''
    au_audio.c: In function `drain_playback':
    au_audio.c:724: warning: passing arg 1 of `interruptible_sleep_on' from
    incompat
    ible pointer type
    au_audio.c:767:41: missing binary operator before token ''(''
    au_audio.c: In function `add_wave_device':
    au_audio.c:771: warning: implicit declaration of function `init_waitqueue'
    au_audio.c:825:41: missing binary operator before token ''(''
    au_audio.c:838:41: missing binary operator before token ''(''
    au_audio.c: In function `get_frags':
    au_audio.c:843: warning: implicit declaration of function `MAP_NR'
    au_audio.c:859:41: missing binary operator before token ''(''
    au_audio.c:867:41: missing binary operator before token ''(''
    au_audio.c:879:41: missing binary operator before token ''(''
    au_audio.c: In function `set_data_format':
    au_audio.c:962: warning: deprecated use of label at end of compound statement
    au_audio.c: In function `au_handle_timer':
    au_audio.c:1121: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    au_audio.c:1143: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    au_audio.c:1173: warning: passing arg 1 of `__wake_up' from incompatible
    pointer
    type
    make: *** [au_audio.o] Error 1
    Gondolom ez nem valami jó lehet?!

  • Vangelis
    félisten

    Gond van nincs olyanom hogy au8830
    /lib/modules/2.4.21-99-athlon/kernel/sound/pci
    nekem gondolom itt volna
    nincsen
    akkor hogyan raktam fel az alsat

  • proximus
    senior tag

    Na akkor ajánlok én neked egy olyat, hogy: lsmod <--ez megmondja milyen modulok vannak betöltve. Ha találsz közte olyat hogy snd-''valami'', akkor az a hangkártya drivere, (tudtommal csak az aktuális hangkarihoz tartozó lehet betöltve) de valószínűbb hogy nincs bent, mert ha lenne, mennének a mixerek. Szóval ha semmi snd..., akkor add ki ezt: modprobe snd-au8830 <--ezzel a drivert betöltöd. Most írj egy ilyet: alsactl restore <-- mixer-szintek visszaállítása, de ez nem fontos, viszont az alsactl store (mixer-szintek tárolása) később jól jöhet.(az alsactl progi az alsa-utils csomagban van, legalábbis Gentoo -nál.) A /lib/modules/kernel_verzió/kernel/sound/pci/ -ben nézhetsz más drivereket is, ha nem jó amit mondtam. Ha az előzőek rendben vannak, próbálj egy ilyet alsamixer Ha látod a ''csúszkákat'', 1. Vehetsz egy nagy levegőt:), 2. kipróbálhatod a többi mixert (grafikus-ak).

  • Vangelis
    félisten

    ami történt felraktam (legalábbis szerintem az alsa103a tart9
    de a yast nem löki ki a kártyát legalábbis nincs a listában
    miért ?
    vagy egyálétalán ott kell lennie vagy nekem külön fel kell még valamit raknom
    már nagyon idegesít a dolog úgyhogy jobb lenne túlesenm rajta
    nekem valahogy nagyon bejött ez a suse 9,0 nem tudom miért
    már sikerült elindítanom keményen a netet úgyhogy ez van
    most is erről nyomom
    cool
    nagyon
    segítsetek

  • proximus
    senior tag

    amit írtál megpróbálom
    nekem is megvan a leírás de valahogy nagyon nagy gáz van mert szerintem alapból nem rakot fel elegendő csoamgot ez a suse és még tennem kell fel hozzá valamit hogy tökéletesen mennyen
    mert valahogy lée kellene váltani ezt a winfost
    tudom hogy teljesen nem lehet de majd meglátjuk
    ugyanis nem akarok 40k ért op rendszert venni
    mert mint olvastam az oem nem negyon szinpi nekem
    Bár m,ég nagyon sokat kell tanulnom linux ügyileg
    de nem baj
    megpróbálom
    Még egy kérdés melyket a legegyszerűbb kezelni mármint linuxot mert nem mindenki tesz a suse ra vagy ez volna a legjobb (legegyszerűbb)
    Még egy kérdés melyik a legjobb win emulátor és honnan tudok megfelelő codeket letölteni linuxhoz?!
    ennyi lenne előre is köszi mindenkinek

    1. Ha a fordításnál sipákol, akkor az utolsó pár, -főleg gyanús- sort szúrd be ide, én meg majd meglátom mit tehetek.:) (nyugi, sztem van már annyi rutinom, hogy ráleljek a megoldásra:) )
    2. Linux? --> Ha az angolt nem szeressed, akkor eléggé az UHU felé hajlik a pálma, ha viszont ez nem zavar, akkor édemes lehet kipróbálni a Mandrake -t, de ha még egy kis bütykölős affinitást is érzel magadban, akkor debian. (+Ha még van egy legalább közepes géped(->ez úgy látom simán nem gond:) ) mindehhez, akkor Gentoo, és tutira tudok segíteni is.:) ) Most hogy így belegondolok, mindenképp Gentoo -t ajánlok.:)) Hozzáteszem, hogy nem alaptalanul, mert volt(van) már SuSe -m(7.3 dobozos, 8.0 Live CD), Mandrake -m(8.2, 9.0); de a legelső egy Chip CD -s Corel linux volt... Ekkor történt az, hogy valami hihetetlenül megfogott benne, hogy mi, azt nem igazán tudnám megmondani, bár lehet hogy a titokzatossága, illetve ''vadsága''. Akkoriban még elég láma voltam hozzá, így visszakerült a win, csakhogy később egyre erősebb késztetést éreztem, hogy márpedig megint meg kell próbálnom zöldágra vergődni pingussal.:D Mostanra ott tartok, hogy ha kell a game, irány a win(kivéve ha az emulátor megeszi:) ), minden másra ott a Linux.:)
    3. Hááát, legjobb Win emu.? Maga a Win...:), csakhogy benne a Vmware -ben, az meg a Linuxban.:D :DDD Na jó, ott van a wine(vagy a fizetős winex), de még mindíg intenzíven fejlesztik. Ha a progi nem a f@szom msi installerrel akar települni, akkor többnyire fel lehet őket pakolni a wine(winex már fifikásabb egy hangyányit:) ) emulátorban.:)

  • WN31RD
    addikt

    amit írtál megpróbálom
    nekem is megvan a leírás de valahogy nagyon nagy gáz van mert szerintem alapból nem rakot fel elegendő csoamgot ez a suse és még tennem kell fel hozzá valamit hogy tökéletesen mennyen
    mert valahogy lée kellene váltani ezt a winfost
    tudom hogy teljesen nem lehet de majd meglátjuk
    ugyanis nem akarok 40k ért op rendszert venni
    mert mint olvastam az oem nem negyon szinpi nekem
    Bár m,ég nagyon sokat kell tanulnom linux ügyileg
    de nem baj
    megpróbálom
    Még egy kérdés melyket a legegyszerűbb kezelni mármint linuxot mert nem mindenki tesz a suse ra vagy ez volna a legjobb (legegyszerűbb)
    Még egy kérdés melyik a legjobb win emulátor és honnan tudok megfelelő codeket letölteni linuxhoz?!
    ennyi lenne előre is köszi mindenkinek

    ''Még egy kérdés melyket a legegyszerűbb kezelni mármint linuxot''
    Próbáld meg az UHU Linuxot ([L]http://www.uhulinux.hu[/L]) vagy esetleg a CD-ről indítható Knoppixot ([L]http://www.knoppix.org[/L]), talán könnyebben boldogulsz majd velük.

  • Vangelis
    félisten

    Nézd meg ezt:
    [L]http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Aureal&card=Generic&chip=AU8830&module=au8830[/L]

    Bár a lényeges ez lenne:

    ./configure --with-cards=au8830 --with-sequencer=yes
    make
    make install

    Ja igen, a fordításhoz: gcc, kernel forrás(de minimum kernel-headers), make, fönt vannak?
    (Ezeknek benne kell lennie a SuSe -ben)

    amit írtál megpróbálom
    nekem is megvan a leírás de valahogy nagyon nagy gáz van mert szerintem alapból nem rakot fel elegendő csoamgot ez a suse és még tennem kell fel hozzá valamit hogy tökéletesen mennyen
    mert valahogy lée kellene váltani ezt a winfost
    tudom hogy teljesen nem lehet de majd meglátjuk
    ugyanis nem akarok 40k ért op rendszert venni
    mert mint olvastam az oem nem negyon szinpi nekem
    Bár m,ég nagyon sokat kell tanulnom linux ügyileg
    de nem baj
    megpróbálom
    Még egy kérdés melyket a legegyszerűbb kezelni mármint linuxot mert nem mindenki tesz a suse ra vagy ez volna a legjobb (legegyszerűbb)
    Még egy kérdés melyik a legjobb win emulátor és honnan tudok megfelelő codeket letölteni linuxhoz?!
    ennyi lenne előre is köszi mindenkinek

  • Vangelis
    félisten

    A csomag miert nem jo?
    Ha van package management, akkor hasznaljuk, azert van, meg amugy is megkonnyiti az ember eletet.
    A modem meg nem gaz, anyam gepet is modemen keresztul szoktam adminisztralni, az ssh-nak eleg egy modem :)

    Ami van
    Nem nagyon megy a net linuxom alól kínlódik a modemmel
    A 9,06 alsa nem jó mert nem támogatja legalábbis nekem a többi meg csak tarban van meg az meg nem megy fel mert nem találja a cc parancsot

  • proximus
    senior tag

    Hát itt csak annyi a gond hogy modemről nyomom
    ja és nem csomagból akarom felrakni hanem kicsomagolt tar-ból

    Nézd meg ezt:
    [L]http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Aureal&card=Generic&chip=AU8830&module=au8830[/L]

    Bár a lényeges ez lenne:

    ./configure --with-cards=au8830 --with-sequencer=yes
    make
    make install

    Ja igen, a fordításhoz: gcc, kernel forrás(de minimum kernel-headers), make, fönt vannak?
    (Ezeknek benne kell lennie a SuSe -ben)

  • dabadab
    titán

    Hát itt csak annyi a gond hogy modemről nyomom
    ja és nem csomagból akarom felrakni hanem kicsomagolt tar-ból

    A csomag miert nem jo?
    Ha van package management, akkor hasznaljuk, azert van, meg amugy is megkonnyiti az ember eletet.
    A modem meg nem gaz, anyam gepet is modemen keresztul szoktam adminisztralni, az ssh-nak eleg egy modem :)

  • Vangelis
    félisten

    Ahhoz, hogy felrakd az alsat rpm-bol, nem is kell c fordito.
    Ha gondolod, neten keresztul belovom neked a cuccot, ha megbeszeljuk a reszleteket (pl hogy mikor, meg ilyenek:)

    Hát itt csak annyi a gond hogy modemről nyomom
    ja és nem csomagból akarom felrakni hanem kicsomagolt tar-ból

  • dabadab
    titán

    Ahhoz, hogy felrakd az alsat rpm-bol, nem is kell c fordito.
    Ha gondolod, neten keresztul belovom neked a cuccot, ha megbeszeljuk a reszleteket (pl hogy mikor, meg ilyenek:)

  • Vangelis
    félisten

    Ha a cc parancs hiányzik, akkor bizony a GNU C fordítóval van gond. Vagy nincs fenn a gépeden, vagy (ez a valószínűbb) rosszul van beállítva, és nem találja magát.
    Mivel a SuSE-t nem ismerem, konkrét tanácsot nem tudok adni, de ez talán segít megtalálni a hibát.

    hát ez van

  • WN31RD
    addikt

    ok megpróbálom


    nekem valmi cc parancsot sem tud elvégezni meg ilyenek
    tehát vége error
    de van egy ilyenm: http://www.linuxportal.hu/dokumentumok/hardver/Aureal/
    valahogy ez sem működik
    mint mondtam kezdő vagyok

    [Szerkesztve]

    Ha a cc parancs hiányzik, akkor bizony a GNU C fordítóval van gond. Vagy nincs fenn a gépeden, vagy (ez a valószínűbb) rosszul van beállítva, és nem találja magát.
    Mivel a SuSE-t nem ismerem, konkrét tanácsot nem tudok adni, de ez talán segít megtalálni a hibát.

  • Vangelis
    félisten

    OK, nincs gaz.
    Az a baj, hogy a SUSE viszonylag lassan update-el, meg nincs hivatalos SUSE csomag a 0.9.6-os utani ALSA-bol.
    Ellenben vannak remek site-ok, mint pl az rpmseek.com, ahol lehet keresni cuccokat ([L]http://rpmseek.com/rpm-pl/alsa.html?hl=com&cbd=0:A:0::44[/L])
    Itt ezek kozul neked a 9.0-as Susehoz valo 1.0.2-es binaris kell, vagyis ez:
    [L]http://rpmseek.com/rpm-dl/alsa-1.0.2-0.pm.1.src.html?hl=com&cbd=0:A:0:1144687:44:0:0[/L]
    Ha installalod, akkor valoszinuleg jo lesz
    (mondjuk en konkretan Debian user vagyok, de olyan bazi nagy kulonbsegek nincsenek)

    [raktam email ertesitest a topikra, ha vmi gaz van, irj]

    [Szerkesztve]

    ok megpróbálom


    nekem valmi cc parancsot sem tud elvégezni meg ilyenek
    tehát vége error
    de van egy ilyenm: http://www.linuxportal.hu/dokumentumok/hardver/Aureal/
    valahogy ez sem működik
    mint mondtam kezdő vagyok

    [Szerkesztve]

  • dabadab
    titán

    OK, nincs gaz.
    Az a baj, hogy a SUSE viszonylag lassan update-el, meg nincs hivatalos SUSE csomag a 0.9.6-os utani ALSA-bol.
    Ellenben vannak remek site-ok, mint pl az rpmseek.com, ahol lehet keresni cuccokat ([L]http://rpmseek.com/rpm-pl/alsa.html?hl=com&cbd=0:A:0::44[/L])
    Itt ezek kozul neked a 9.0-as Susehoz valo 1.0.2-es binaris kell, vagyis ez:
    [L]http://rpmseek.com/rpm-dl/alsa-1.0.2-0.pm.1.src.html?hl=com&cbd=0:A:0:1144687:44:0:0[/L]
    Ha installalod, akkor valoszinuleg jo lesz
    (mondjuk en konkretan Debian user vagyok, de olyan bazi nagy kulonbsegek nincsenek)

    [raktam email ertesitest a topikra, ha vmi gaz van, irj]

    [Szerkesztve]

  • Vangelis
    félisten

    Csak annyi volna hogy honnan tudom leszedni az alsa 097c csomagot rmp-n
    mert valahogy nem tudom felrakni a tar-t kicsomagolás után sem

  • Vangelis
    félisten

    Bocsánat a méretes offolásért, de nem magyaráznád el nekem, hogyan lehetne Knoppix alá ADSL-t telepíteni? (Részletes leírás kellene.) Nagyon tetszene az oprendszer, de így nem ér túl sokat.

    nekem még a sima net sem megyen nem hogy adsl

  • Vangelis
    félisten

    amit a pizzafutar irt, arra csak egy doubleclick es mar fel is települ es nem kell make-lni. en is full amatör vagyok Linuxban es ezert különösen szeretem az rpm-eket (meg a doubleclick-et :D )

    annyi a gond hogy az nem tökéletes mert még az sem támogatja legalábbis nem ismeri fel és én sem találom benne
    ami kelle az a 097c alsa csomag mert az támogatja
    de nem találok csak tar-t

  • perempe
    veterán

    Tényleg nem túl nehéz felrakni és beállítani az ALSA-t, úgy, hogy menjen a Vortex2 kártya.
    A Knoppix 3.3 ([L]http://www.knoppix.org/[/L]) egyébként felismeri alapból, és be is tölti hozzá a modulokat, tehát - ha máshogy nem megy - esetleg hasznos lehet abból kinézni a szükséges beállításokat.

    Bocsánat a méretes offolásért, de nem magyaráznád el nekem, hogyan lehetne Knoppix alá ADSL-t telepíteni? (Részletes leírás kellene.) Nagyon tetszene az oprendszer, de így nem ér túl sokat.

  • PWR
    aktív tag

    aha töltöm a bizonyos ''make'' csomagot
    már nagyon remélem hogy működni fog
    habár tényleg nehezemre esik felrakni egy tar állományt a csomagot egyszerűbb
    de tudnál nekem abban segíteni hogy hol találom meg az Alsa0.9.7.c csomagot megköszönném
    előre is kösz

    [Szerkesztve]

    amit a pizzafutar irt, arra csak egy doubleclick es mar fel is települ es nem kell make-lni. en is full amatör vagyok Linuxban es ezert különösen szeretem az rpm-eket (meg a doubleclick-et :D )

  • Vangelis
    félisten

    ''pl make install stb
    legalábbis a suse nem talált ilyen filet v parancsot
    ''
    Nézd meg ezt a topicot: [L]http://prohardver.hu/rios3_forum.php?mod=40&id=46219[/L]

    aha töltöm a bizonyos ''make'' csomagot
    már nagyon remélem hogy működni fog
    habár tényleg nehezemre esik felrakni egy tar állományt a csomagot egyszerűbb
    de tudnál nekem abban segíteni hogy hol találom meg az Alsa0.9.7.c csomagot megköszönném
    előre is kösz

    [Szerkesztve]

  • WN31RD
    addikt

    próbáltam a legujabb alsa t felrakni de nem nagyon ment mert amit megadott parancsokat nem volt hajlandó végrehajtani
    pl make install stb
    legalábbis a suse nem talált ilyen filet v parancsot
    de komolyan nem értem miért nem megy mert minenki ezt javaslta

    ''pl make install stb
    legalábbis a suse nem talált ilyen filet v parancsot
    ''
    Nézd meg ezt a topicot: [L]http://prohardver.hu/rios3_forum.php?mod=40&id=46219[/L]

  • Vangelis
    félisten

    Megegyszer:

    ftp://ftp.suse.com/pub/suse/i386/9.0/suse/i586/alsa-0.9.6-96.i586.rpm

    felraktad?

    próbáltam a legujabb alsa t felrakni de nem nagyon ment mert amit megadott parancsokat nem volt hajlandó végrehajtani
    pl make install stb
    legalábbis a suse nem talált ilyen filet v parancsot
    de komolyan nem értem miért nem megy mert minenki ezt javaslta

  • Pizzafutar
    aktív tag

    még egy darabig maradok esetleg ha van itt egy suse 9.0 fan akkor legyen olyan kedves jelentkezzen

    Megegyszer:

    ftp://ftp.suse.com/pub/suse/i386/9.0/suse/i586/alsa-0.9.6-96.i586.rpm

    felraktad?

  • Vangelis
    félisten

    még egy darabig maradok esetleg ha van itt egy suse 9.0 fan akkor legyen olyan kedves jelentkezzen

  • Vangelis
    félisten

    sajna nem
    régen nem voltam mert azóta kinlódok vele és senki semmit nem tud mondani
    lehet hogy nem ilyen gagyi karival kellene próbálkoznom
    tudna még valaki esetleg segíteni
    előre is köszi

    [Szerkesztve]

  • Vangelis
    félisten

    Az 1.0.3-as ALSA feltehetően jó, de biztosra nem tudom mondani, mert én még mindig 0.9.8-asat használok.

    de végülis itt nem kell telepíteni meg ilyenek

  • Vangelis
    félisten

    Az 1.0.3-as ALSA feltehetően jó, de biztosra nem tudom mondani, mert én még mindig 0.9.8-asat használok.

    sajnálom hogy nem ismerem a linuxot de ez van talán majd megtanulom hamarosan de ma nem tudom
    Akkor legyetek szivesek segíteni ha tudtok
    mint írtam a kari ott van de nem aktív
    Sajna azt hittem a linuxban is vannak hasonló exe vagy más fajlok mint a windowsban de tévedtem
    Segítsetek sos

  • WN31RD
    addikt

    amit töltök jó lesz?
    http://www.alsa-project.org/

    [Szerkesztve]

    Az 1.0.3-as ALSA feltehetően jó, de biztosra nem tudom mondani, mert én még mindig 0.9.8-asat használok.

  • WN31RD
    addikt

    és ezzel okosabb lettem szerinted
    ha most ez megvan mit kell tennem vele

    Nem ismerem a SuSE-t, úgyhogy nem tudhatom pontosan, hogy mit kell csinálnod.
    Egyébként kicsit barátságosabb hangvételű segítségkérésre én (de talán mások is) szívesebben válaszolok...

    A bemásolt konfigfile jó akkor, ha csak egy Vortex 2 hangkártyát akarsz használni a gépedben. Olvasd el az ALSA dokumentációját, és leírják, hogy hogyan kell beállítani. Annyit segítettem, hogy a konkrét paramétereket már nem neked kell kitalálnod.
    Az én linuxomban egyébként úgy menne a dolog, hogy leállítod az alsa service-t (''/etc/init.d/alsa stop''), utána a file-t bemásolod ''alsa'' néven az /etc/modules.d/ könyvtárba, aztán kiadsz egy modules-update parancsot, végül pedig elindítod az alsa service-t (''/etc/init.d/alsa start'').

  • Vangelis
    félisten

    Bemásolom a Vortex 2 kártyámhoz tartozó /etc/modules.d/alsa file-t, hátha ez segít valakinek:

    # ALSA portion
    alias char-major-116 snd
    # OSS/Free portion
    alias char-major-14 soundcore

    ##
    ## IMPORTANT:
    ## You need to customise this section for your specific sound card(s)
    ## and then run `update-modules' command.
    ## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
    ##
    ## ALSA portion

    alias snd-card-0 snd-au8830
    ## OSS/Free portion
    alias sound-slot-0 snd-card-0
    ##

    # OSS/Free portion - card #1
    alias sound-service-0-0 snd-mixer-oss
    alias sound-service-0-1 snd-seq-oss
    alias sound-service-0-3 snd-pcm-oss
    alias sound-service-0-8 snd-seq-oss
    alias sound-service-0-12 snd-pcm-oss

    alias /dev/mixer snd-mixer-oss
    alias /dev/dsp snd-pcm-oss
    alias /dev/midi snd-seq-oss

    # Set this to the correct number of cards.
    options snd cards_limit=1

    amit töltök jó lesz?
    http://www.alsa-project.org/

    [Szerkesztve]

  • WN31RD
    addikt

    Bemásolom a Vortex 2 kártyámhoz tartozó /etc/modules.d/alsa file-t, hátha ez segít valakinek:

    # ALSA portion
    alias char-major-116 snd
    # OSS/Free portion
    alias char-major-14 soundcore

    ##
    ## IMPORTANT:
    ## You need to customise this section for your specific sound card(s)
    ## and then run `update-modules' command.
    ## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
    ##
    ## ALSA portion

    alias snd-card-0 snd-au8830
    ## OSS/Free portion
    alias sound-slot-0 snd-card-0
    ##

    # OSS/Free portion - card #1
    alias sound-service-0-0 snd-mixer-oss
    alias sound-service-0-1 snd-seq-oss
    alias sound-service-0-3 snd-pcm-oss
    alias sound-service-0-8 snd-seq-oss
    alias sound-service-0-12 snd-pcm-oss

    alias /dev/mixer snd-mixer-oss
    alias /dev/dsp snd-pcm-oss
    alias /dev/midi snd-seq-oss

    # Set this to the correct number of cards.
    options snd cards_limit=1

  • Vangelis
    félisten

    Na indítom ujra és meglátjuk

    jé magammal beszélek
    most töltöm ezt remélem jó lesz
    alsa 1,0,3
    3,9kb/másodperc
    mindjárt meglesz


    [Szerkesztve]

  • Vangelis
    félisten

    ok
    de ha látja linux akkor miért nem teszi aktívvá

    nekem ez még bonyolult tényleg
    pedig csak ennyi gondom van más semmi

  • Vangelis
    félisten

    ''Az egy dolog hogy angolúl gyenge vagyok de németűl ...''
    Van egy amerikai/brit kombinált zászló rögtön az első oldalon, a következő szöveggel mellette:
    ''This page is now also available in english''
    Ha erre rákattintasz, akkor mindjárt angolul láthatod az oldalakat: [L]http://www.knopper.net/knoppix/index-en.html[/L]
    :)

    [Szerkesztve]

    ok
    de ha látja linux akkor miért nem teszi aktívvá

  • WN31RD
    addikt

    Az egy dolog hogy angolúl gyenge vagyok de németűl ...
    látja magát a kártyát csak nem akarja használni vmiért
    module
    aktive=none
    vagy valami hasonló
    és nincs hangom

    [Szerkesztve]

    ''Az egy dolog hogy angolúl gyenge vagyok de németűl ...''
    Van egy amerikai/brit kombinált zászló rögtön az első oldalon, a következő szöveggel mellette:
    ''This page is now also available in english''
    Ha erre rákattintasz, akkor mindjárt angolul láthatod az oldalakat: [L]http://www.knopper.net/knoppix/index-en.html[/L]
    :)

    [Szerkesztve]

  • Vangelis
    félisten

    Hogyha az alsa driver (Advancanced Linux Sound valami) megfelelő verziója bent van a Suseban, akkor csak telepited a csomagot, megmondod milyen hangkártyád van, és a többit a suse elvégzi.
    Ha nincs, akkor egy kicsit bonyolultabb a helyzet, de akkor is aránylag egyszeűen feltelepithető.
    Csak bátran, legalább megismered a Linuxot :)

    még annyi hogy telepítésnél nincs benne az izében de a suse már látja csak nem haználja

  • Vangelis
    félisten

    Tényleg nem túl nehéz felrakni és beállítani az ALSA-t, úgy, hogy menjen a Vortex2 kártya.
    A Knoppix 3.3 ([L]http://www.knoppix.org/[/L]) egyébként felismeri alapból, és be is tölti hozzá a modulokat, tehát - ha máshogy nem megy - esetleg hasznos lehet abból kinézni a szükséges beállításokat.

    Az egy dolog hogy angolúl gyenge vagyok de németűl ...
    látja magát a kártyát csak nem akarja használni vmiért
    module
    aktive=none
    vagy valami hasonló
    és nincs hangom

    [Szerkesztve]

  • WN31RD
    addikt

    Tényleg nem túl nehéz felrakni és beállítani az ALSA-t, úgy, hogy menjen a Vortex2 kártya.
    A Knoppix 3.3 ([L]http://www.knoppix.org/[/L]) egyébként felismeri alapból, és be is tölti hozzá a modulokat, tehát - ha máshogy nem megy - esetleg hasznos lehet abból kinézni a szükséges beállításokat.

  • Pizzafutar
    aktív tag

    én nagyon buta vagyok ehez de le kellene töltenem a drivert vagy micsodát
    lehet hogy winfoshoz vagyok szokva de még a linuxot tanulnom kell

    Hogyha az alsa driver (Advancanced Linux Sound valami) megfelelő verziója bent van a Suseban, akkor csak telepited a csomagot, megmondod milyen hangkártyád van, és a többit a suse elvégzi.
    Ha nincs, akkor egy kicsit bonyolultabb a helyzet, de akkor is aránylag egyszeűen feltelepithető.
    Csak bátran, legalább megismered a Linuxot :)

  • Vangelis
    félisten

    nem bonyolult
    Az jelenti, hogy az alsa (konkrétan a 0.9.4 verzio) tamogatja a hangkártyád.
    Ragd fel az alsa drivert, a suseben biztos bent van, és válaszd a au8830 kártyát.

    én nagyon buta vagyok ehez de le kellene töltenem a drivert vagy micsodát
    lehet hogy winfoshoz vagyok szokva de még a linuxot tanulnom kell

  • Pizzafutar
    aktív tag

    sajna nekem ez túl bonyolult
    mármint a linux de sajna kellene egy pár dologhoz mert ezt kell tanulgatnom és nem értem
    könnyebben pl magyarul nem lehetne

    nem bonyolult
    Az jelenti, hogy az alsa (konkrétan a 0.9.4 verzio) tamogatja a hangkártyád.
    Ragd fel az alsa drivert, a suseben biztos bent van, és válaszd a au8830 kártyát.

  • Vangelis
    félisten

    sajna nekem ez túl bonyolult
    mármint a linux de sajna kellene egy pár dologhoz mert ezt kell tanulgatnom és nem értem
    könnyebben pl magyarul nem lehetne

  • zrubi
    senior tag

    Sehol senkki
    nincsen hangom és senki nem tud segíteni!

    [L]http://www.alsa-project.org/alsa-doc/index.php3?vendor=vendor-Diamond_Multimedia#matrix[/L]

  • emvy
    félisten

    Sehol senkki
    nincsen hangom és senki nem tud segíteni!

    http://www.google.com/search?q=alsa&sourceid=mozilla-search&start=0&start=0&ie=utf-8&oe=utf-8

  • Vangelis
    félisten

    Melyik linux támogatja a hangkarimat mert a suse 8,2 nem volt hajlandó használni vagy hol tudok letöltebóni csomagot hozzá ha egyáltalán van vagy mi lenne a legjobb megoldás

Aktív témák